EWF DISK Overlay on a second HD?

  • Thread starter Thread starter Kai
  • Start date Start date
K

Kai

Hello all,

I have a HD with the first partition write-protected. The
DISK overlay is stored in the unpartitioned space of this
very HD.

Is it possible to store the overlay in a second HD? The
idea is to use a CF for the XPe image and to store the
data (the overlay) in an additional HD.

And when this is possible, can I exchange the CF with an
updated XPe image and use the overlay in the HD with the
new image?

Kai
 
If posible you won't be able to do it just like that. You will need to make
some steps to support this.

You will probably need to empty overlay before you change CF.

Regards,
Slobodan
 
You must log in or register to reply here.

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

boot with CF is slow 2
Deploying dual boot XPe C:\ partitions on target with disk overlay EWF 3
EWF Overlay on second disk drive 2
EWF RAM problem 2
EWF with DISK overlay and NTFS 2
EWF disk overlay on a different hard disk. 10
Protecting fixed CF with disk resident EWF overlay 9
HD faults protection using EWF 6

Back
Top