Erro in Sytem Event Viewer

G

Guest

Ever since I installed a Linksys BEFSX41 router/firewall unit, I've notice an
error in the System Event Viewer with this information:

The IP address lease 192.168.2.100 for the Network Card with network address
00184DE9390C has been denied by the DHCP server 192.168.2.1 (The DHCP Server
sent a DHCPNACK message).

What needs to be done to get rid of this error? Every entry with DCHP has
this error.
 
R

Robert L [MVP - Networking]

Are you running DHCP in the windows server?

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
Ever since I installed a Linksys BEFSX41 router/firewall unit, I've notice an
error in the System Event Viewer with this information:

The IP address lease 192.168.2.100 for the Network Card with network address
00184DE9390C has been denied by the DHCP server 192.168.2.1 (The DHCP Server
sent a DHCPNACK message).

What needs to be done to get rid of this error? Every entry with DCHP has
this error.
 
G

Guest

F.Y.I. Well, my problem has been solved and I wanted to post some feedback
here for whom ever is interested. The Linksys tech support made me change
the IP address of the router to 10.10.10.1 as oppose to 192.168.2.1 His
reasoning was that the original IP address was too close to my modem IP
address of 192.168.1.1 and causing some kind of cross mis reads or something
like that. The 10.10.10.1 is a sub for the other one. Thought you guys want
to know.
 
R

Robert L [MVP - Networking]

Thank you for the feedback.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
F.Y.I. Well, my problem has been solved and I wanted to post some feedback
here for whom ever is interested. The Linksys tech support made me change
the IP address of the router to 10.10.10.1 as oppose to 192.168.2.1 His
reasoning was that the original IP address was too close to my modem IP
address of 192.168.1.1 and causing some kind of cross mis reads or something
like that. The 10.10.10.1 is a sub for the other one. Thought you guys want
to know.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads


Top