Event Viewer System Error Source Dhcp

C

ColTom2

Hi:

Can anyone tell me how to correct the Event Viewer System Error below?

Thanks,

ColTom2

Event Type: Error
Event Source: Dhcp
Event Category: None
Event ID: 1002
Date: 10/9/2007
Time: 8:28:52 AM
User: N/A
Computer: VALUED-E91AB895
Description:
The IP address lease 192.168.1.100 for the Network Card with network address
00112F3286D4 has been denied by the DHCP server 192.168.1.1 (The DHCP Server
sent a DHCPNACK message).
 
R

R. McCarty

Best way to overcome this long-term is to assign a permanent IP
address from your router's range. This way at boot time you do
not have to wait for DHCP configuration and your network LAC
will start up a little faster.

Otherwise you'll have to login to the router and check the setting
for DHCP address range and lease time.
 
R

R. McCarty

Your Router provides a range of addresses. Usually, the Router
itself takes the lowest number of that range. To configure TCP/IP
you enter Network Connections, Right Click the appropriate LAC
( Local Area Connection ). Left Click Properties. From the details
box left click "Internet Protocol" to select/highlight then click the
Properties button. Toggle the Radio button to "Use the following
IP Address:" Enter a IP from the Router's range, Subnet mask is
255.255.255.0, Gateway and DNS Server will be your routers IP
address.

Your router documentation will note the IP Address which is the
web interface address you use to login and administer the router.
 
C

ColTom2

I have no idea as to how to answer your question other than to say I do
have a wireless laptop running from the router attached to my desktop
(VALUED-E91AB895). Could this be what your talking about that could be
causing this problem?

ColTom2
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top