D
davidjohnbarlow
My Epson R200 developed a fault after 2 years. The red paper LED would
flash to indicate a paper jam and sometimes both red paper and ink LEDs
would flash together. After dismantling the printer I found no foreign
objects inside and the paper sensor appeared to function normally. I
later discovered a switch on the CD guide which was not operating
properly as the guide does not fully close. The problem was solved by
placing a piece of Blu-Tack over the corner of the CD Guide to ensure
that the switch is fully engaged. See www.colourcasts.20m.com for
photos.
flash to indicate a paper jam and sometimes both red paper and ink LEDs
would flash together. After dismantling the printer I found no foreign
objects inside and the paper sensor appeared to function normally. I
later discovered a switch on the CD guide which was not operating
properly as the guide does not fully close. The problem was solved by
placing a piece of Blu-Tack over the corner of the CD Guide to ensure
that the switch is fully engaged. See www.colourcasts.20m.com for
photos.