DHCP + Static

  • Thread starter Thread starter Roger
  • Start date Start date
Thank You, I will add DHCP and have 15 address for them
to access. This is Windows 2000 Adv. Sever.
Thanks Again,
Roger
 
Yes. You can have DHCP set so any 'guest' that brings in a laptop can
obtain an IP address from your scope. If you want your workstations to all
be static, then just enter the IP addresses you want them to have. Your
scope should not include static IP addresses you are using since they will
not be available and you could get IP address conflicts.

Roland

Can I have Static Address and run DHCP for guest???
 
You're welcome. (O:=

Thank You, I will add DHCP and have 15 address for them
to access. This is Windows 2000 Adv. Sever.
Thanks Again,
Roger
 
You must log in or register to reply here.

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Port trunking on NAS using a Qnap QSW-M408-2C and a Qnap TS-239 Pro II 4
dhcp 3com managed switch problem 1
IP address problems 3
Trouble Adding Static IP Address 1
DHCP Client - set standard gateway manual 1
How to maintain both DHCP and PPPoE assigned IP Addresses 2
2003 Server Standard Edition DHCP Server problems 6
How do you configure Windows 2000 server not to be the DHCP server 14

Back
Top