CPU settings

[Guest]

Warning! CPU has been changed. or CPU ratio change fail. Please re-enter CPU
settings in the CMOS setup and remember to save before quit! This is the
message I see when I boot up, so I either have to press F1 to continue or DEL
to enter BIOS, when I go into BIOS I check the settings I know about (which
is very limited) and press F10 to save, press Y and enter, then nothing
happens, the sceen is frozen to get out of BIOS I press CTRL, ALT and DEL to
re-boot. Once re-booted I see the same screen again, if I press F1 my system
starts as normal. Does anyone know anything about my issue

 

[Thota Umesh]

Hiii, Since u cannot use bios to set anything u can restore it to default
state by removing the bios battery shut down ur system disconnect all power
cords remove the battery wait for 1minute and place it back this shd restate
ur bios to default factory settings.

Hope this helps..,
Umesh Thota
www.windowsworkshop.com

 

[Guest]

Hi thanks for the advice unfortunatly this didn't work I replaced the battery
with a new one and still the same result