CD's have no sound on new DVD player

M

Mal_UK

I have just installed a DVD RW on my compaq deskpro, into
a port where there was previously a cd player. DVD's play
ok with sound & on board windows sounds are ok & all
speaker tests are ok. However,when I insert an audio CD,
the CD player starts but there is no sound. I have
connected the sound lead as advised by the DVD manual. Can
anyone advise what the problem is?
I thought that the CD may have been using some of the
ribbon cable channels for sound direct to the m/board as
there wasn't an audio lead connected to the cd player. If
this was the case how can I re-install the sound lead on
the DVD player. Is there a command in the bios?

thanks in advance for any help.
 
R

Renee

You need to contact Creative Labs and get driver info.
Multi port capabilities may not be recognized.

Renee

Renee
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

no sound from dvd player 1
WM Player 11-- no DVD sound 7
DVD Drive 4
Sound issue with Lite-On CD player and audio CD's 7
Samsung TV new wont put enough signal out power for sound bar? 10
DVD-RW keeps changing to CD-RW when disk or inserted WHY? 1
Realtek sound manager works but no other sound device will work 2
Media Player - No Sound on DVD but Sound on CDs 1

Top