Bootvis Driver delay not traced

[Rich Bell]

When I trace "Next Boot + Driver Delays" the "Driver Delay" data is not
captured. The Process Creates data is captured. Any ideas why? This used to
work several months ago. I have built a new system with an AMD64 3400+
processor since the last time I ran Bootvis. Is there a problem with a 64
bit chip and Bootvis?

 

[Richard Urban]

You will not find bootvis under general Microsoft downloads anymore because
there WERE problems that surfaced after SP1. It is not a supported or
updated application (to the best of my knowledge). That being said, some
still use it without any indication of trouble. Unfortunately, I also am not
one of them!

--
Regards,

Richard Urban

aka Crusty (-: Old B@stard

If you knew as much as you think you know,
You would realize that you don't know what you thought you knew!

 

[Richard Urban]

Also see here!
http://www.microsoft.com/whdc/system/sysperf/fastboot/bootvis.mspx

--
Regards,

Richard Urban

aka Crusty (-: Old B@stard

If you knew as much as you think you know,
You would realize that you don't know what you thought you knew!

 

[Jack]

Bootvis has a new version out that works well so far.

 

[Richard Urban]

If you are not a program developer, and are not capable of recoding your
program to eliminate the startup problems IN your program, the utility is
next to useless!

--
Regards,

Richard Urban

aka Crusty (-: Old B@stard

If you knew as much as you think you know,
You would realize that you don't know what you thought you knew!

 

[Rich Bell]

Bootvis has a new version out that works well so far.

Where can I get the new version?