Blue screen when docked

[Fernand Thill]

I have a w2000 laptop that I use as standalone, and connected via lan to the
corporate net. Since several time I have the following PB when using it
connected in my office, depending if a use the dockstation or connect it
directly by wires. If I connect it through the docking station I get a blue
screen with error messages, if I cconnect it by wire to the net the log is
ok. If then I plug (with system running) it to the docking station it
continues to run well. I have the same pb when I'am going to close the
system: dockek : no shuting but blue screen with error messages, when
directed wired or first unplugged from the dockung station and switching the
lan connection wire: no pb for shutting down.
Can somebody give me hints? I would appreciate
Fernand

 

[richard lyda]

Hello Fernand,
It sounds like your hardware profiles are corrupted and specifically the
NIC drivers. I would re-create your docked hardware profile following the
manufactures directions. Docking station setup can be very difficult.

Good luck.
***
Richard Lyda
Server Setup Team

Please reply to the newsgroup and not directly to me.
This allows others to add to and benefit from these threads
and also helps to ensure a more timely response.
This posting is provided "AS IS" without warranty either
expressed or implied, including, but not limited to, the
implied warranties of merchantability or fitness for a
particular purpose.
The views and opinions expressed in this newsgroup posting
are mine and do not necessarily express or reflect the views
and/or opinions of Microsoft.