BCCode : 10000050 & more

[Guest]

Hi there,
I'm getting these error messages again & again.

My PC is new P4 ram 1gb 120gb HDD.
Only My HP Printer is old & my HP scanner

BCCode : 10000050 BCP1 : F3211AAA BCP2 : 00000001 BCP3 : BF806D06
BCP4 : 00000000 OSVer : 5_1_2600 SP : 2_0 Product : 256_1

What can you see with these

 

[Guest]

Hi there,
I'm getting these error messages again & again.

My PC is new P4 ram 1gb 120gb HDD.
Only My HP Printer is old & my HP scanner

BCCode : 10000050 BCP1 : F3211AAA BCP2 : 00000001 BCP3 : BF806D06
BCP4 : 00000000 OSVer : 5_1_2600 SP : 2_0 Product : 256_1

What can you see with these

This is a very common BCC, and general information can be sought in
Microsoft article:
http://msdn2.microsoft.com/en-gb/library/ms793437.aspx

As well may a reference to the James A. Eshelman site be of interest:
http://aumha.org/a/stop.htm
- click "50" in the left-hand column.

If I understand your problem appeared at the time you connected the "old"
devices HP Printer and HP scanner to your new PC, I recommend you first of
all update the drivers for the two devices, from HP sites.

Regards,
Ka2H

 

[Guest]

Hi there,
I'm getting these error messages again & again.

My PC is new P4 ram 1gb 120gb HDD.
Only My HP Printer is old & my HP scanner

BCCode : 10000050 BCP1 : F3211AAA BCP2 : 00000001 BCP3 : BF806D06
BCP4 : 00000000 OSVer : 5_1_2600 SP : 2_0 Product : 256_1

What can you see with these

Hi,
Update the driver for the Printer and see if it compatible with the
Operating system you are running.
Try to look in the Device Manager for the CD/DVD-ROM and see if it
malfunctioning.
Scan your computer fro malwares and Viruses by whatever software you have.
DMA Mode for ATA/ATAPI Devices in Windows XP
http://www.microsoft.com/whdc/device/storage/IDE-DMA.mspx
How to enable 48-bit Logical Block Addressing support for ATAPI disk drives
in Windows XP
http://support.microsoft.com/kb/303013

Example on the error code:
http://support.microsoft.com/kb/174232

Information about Event ID 51
http://support.microsoft.com/kb/244780/

How to troubleshoot event ID 9, event ID 11, and event ID 15 error messages
http://support.microsoft.com/kb/154690/

To get more info about the Error in Event Viewer please double click the
Error message(X) to get a pop-up window contain info about the causer and you
can copy and paste this content in your next message.
HTH.
nass

 

[Ron Martell]

Hi there,
I'm getting these error messages again & again.

My PC is new P4 ram 1gb 120gb HDD.
Only My HP Printer is old & my HP scanner

BCCode : 10000050 BCP1 : F3211AAA BCP2 : 00000001 BCP3 : BF806D06
BCP4 : 00000000 OSVer : 5_1_2600 SP : 2_0 Product : 256_1

What can you see with these

Your error is being caused by whatever device driver, application
program or Windows component that is using memory address BF806D06
(parameter 3 of your error message).

Try the driver updates as suggested by Nass (HP drivers are always a
good suspect) and if that does not resolve the issue then post a
response back here and we will try to trace the actual culprit.
However if the parameter 3 value changes then that might indicate that
there was some new factor involved in the error.

Good luck

Ron Martell Duncan B.C. Canada
--
Microsoft MVP (1997 - 2008)
On-Line Help Computer Service
http://onlinehelp.bc.ca

"Anyone who thinks that they are too small to make a difference
has never been in bed with a mosquito."