Thank you for posting your Server types and a clear description of your
problem. (I don't answer a lot of posts due to missing critical
information).
Anyway, this series of IBM servers "usually" comes with a Serveraid
controller. So, you are going to want to go to the following web page and
download these drivers:
ftp://ftp.software.ibm.com/pc/pccbbs/pc_servers/23k4684.exe
Then, run this program. It will create a driver disk for you. Now, when
you are booting off of your CDROM, press F6 when prompted. Follow the
driver installation screens and point text-mode setup at the floppy.
When done, you should be able to see your hard disks in setup.
- Bill Curtis [MSFT]
“This posting is provided "AS IS" with no warranties, and confers no
rights.”