C
corbasse
Hi,
I'm trying to do a clean install of xp home. Partitioning and formatting
seem to work, but at 100% format I get this message:
"Setup was unable to format the partition. The disk may be
damaged. Make sure the drive is switched on and properly
connected to your computer. If the disk is a SCSI disk,
make sure your SCSI devices are properly terminated.
Consult your computer or SCSI adapter documentation for
more information"
Creating a partition with Knoppix results in an install which crashes
after the reboot...
There are many, many posts about this problem on google, but not one I
can find has a viable answer. I'll continue trying to replace parts,
cables etc. today, but have already read several posts of people
changing every single part of their computer without succes
Michiel van der Linden
Bruges, Belgium,
cornechasse <at> hotmail <dot> com
ps. There is absolutely *nothing* wrong with the hard diskS I tried.....
I'm trying to do a clean install of xp home. Partitioning and formatting
seem to work, but at 100% format I get this message:
"Setup was unable to format the partition. The disk may be
damaged. Make sure the drive is switched on and properly
connected to your computer. If the disk is a SCSI disk,
make sure your SCSI devices are properly terminated.
Consult your computer or SCSI adapter documentation for
more information"
Creating a partition with Knoppix results in an install which crashes
after the reboot...
There are many, many posts about this problem on google, but not one I
can find has a viable answer. I'll continue trying to replace parts,
cables etc. today, but have already read several posts of people
changing every single part of their computer without succes
Michiel van der Linden
Bruges, Belgium,
cornechasse <at> hotmail <dot> com
ps. There is absolutely *nothing* wrong with the hard diskS I tried.....