This error is very common in RDC over VPN. There are some resolutions you may try.
1. The typical cause is a poor network connection. You may just re-try it.
2. If there is a router between the connections, you may want to upgrade the router.
3. If the Remote Desktop screen comes up black and then you you receive this error, you may need test and modify the MTU.
These links may help,
VPN connection is disconnected after serveral minutes
VPN drops the connection. VPN is very slow. To change the MTU Settings, select the the following ... How to modify the MTU Settings for VPN Connections ... ...
www.chicagotech.net/VPN/vpn3minutes.htm
Can't access RDC over VPN
I would check the MTU first. Or check this link: vpn drop connection ... Then he can use RDC over VPN. Related Topics. How to change MTU ... ...
www.chicagotech.net/Q&A/vpn47.htm
connection issues after 2003 sp1
MTU size my router(s) can use is 1372. setting the MTU value for PPP and VPN cured the packetloss. unfortunately, this didn't cure the ftp / mail / news ...
www.chicagotech.net/Q&A/2003sp1b.htm
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
I want to use Remote Desktop from a VPN Connection.
With WXP SP1 and SP2 I get "Remote Desktop Disconnected. Connection to the
remote computer was broken caused by network error"
Same connection point with same configurationworks with a W2K SP4 PC.
I am using a simple PPTP with a Typical password validation.
Is there a patch are known problem with this.
Thanks,
Diek
