VoIP Mac Addresses

[Guest]

I recently purchased a Linksys PAP2 phone adapter but cannot get it to work
through my Linksys WRT54GS router. I ensured a good ISP interface with both
of my wireless PCs (encrypted) also using the router.

When I activated the service I don't recall entering the MAC address but the
voice response menu verifies the correct address if I enter the code but that
may be just info stored within the phone adapter unit itself and not coming
from the Vonage site.

Has anyone had any experience with this? I also tried entering the port
ranges on the Linksys site but still no joy. So far, Vonage has not been
much help but I can tell I'll need to spend more time working this issue with
them.

As a side note, my Linksys 802.11 a+g network adapters came up first go
around and continues to operate like a champ!!

 

[dg1261]

I recently purchased a Linksys PAP2 phone adapter but cannot get it
to work through my Linksys WRT54GS router. I ensured a good ISP
interface with both of my wireless PCs (encrypted) also using the router.

Has anyone had any experience with this? I also tried entering the
port ranges on the Linksys site but still no joy. So far, Vonage has
not been much help but I can tell I'll need to spend more time
working this issue with them.

I'm certainly no expert, but it sounds like Vonage doesn't have their setup
for you right on their end. All I can tell you is that I have a PAP2
working fine through my WRT54GS, and I did not have to fiddle with any port
range forwarding or anything. I just plugged it in and it works.