Vista Logon problem in to 2000 Pro

I

Ibrahim

Hi, I have a little workgroup. I have a printer server running 2000 Pro, 5
PCs running XP, and 2 Laptops running Vista.
I can print and access the files in the 2000 Pro server from any XP PC. From
both Laptops running vista I can see all the computers in the workgroup, I
can also see the files and use the printer of any PC running XP. The problem
is between Vista and 2000 Pro. I can access files in the Vista Laptops from
the 2000 Pro Server, but I can not see any shared folder or use any printer
in the 2000 Pro Server from the Vista Laptops. Each time I try to connect to
the 2000 Pro Server from the Vista laptops I get a logon dialog box; I
defined in the 2000 Pro server the same users I have in the Vista laptops (I
did't do so for the XP PCs and they work just fine) and no matter what user I
use to logon (I try to use also the 2000 Pro administrator user) I always get
a "Logon Unsucessful" error.
The vista and 2000 Pro has the NetBUI on TCP/IP enabled.
What can I do??
 
I

Ibrahim

For both commands I get the following:

The syntax of this command is:
NET
[ACCOUNTS | COMPUTER | CONFIG | CONTINUE | FILE | GROUP | HELP | HELPMSG |
LOCALGROUP | PAUSE | PRINT | SESSION | SHARE | START | STATISTICS | STOP
|TIME | USE | USER | VIEW]
 
R

Robert L. \(MS-MVP\)

Did you replace win2000ipaddress with the win 2000 IP address?

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
Ibrahim said:
For both commands I get the following:

The syntax of this command is:
NET
[ACCOUNTS | COMPUTER | CONFIG | CONTINUE | FILE | GROUP | HELP | HELPMSG |
LOCALGROUP | PAUSE | PRINT | SESSION | SHARE | START | STATISTICS | STOP
|TIME | USE | USER | VIEW]

--
Ibrahim


Robert L. (MS-MVP) said:
try these command from the Vista:

1. net view \\win2000ipaddtess.
2. net view \\win2000hostname

Do you receive any system errors?

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
Click to expand...
Click to expand...
 
I

Ibrahim

Yes, and the hostname with the computer name. I wrote the following:
net view\\192.168.0.102 and net view\\Naa


--
Ibrahim


Robert L. (MS-MVP) said:
Did you replace win2000ipaddress with the win 2000 IP address?

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
Ibrahim said:
For both commands I get the following:

The syntax of this command is:
NET
[ACCOUNTS | COMPUTER | CONFIG | CONTINUE | FILE | GROUP | HELP | HELPMSG |
LOCALGROUP | PAUSE | PRINT | SESSION | SHARE | START | STATISTICS | STOP
|TIME | USE | USER | VIEW]

--
Ibrahim


Robert L. (MS-MVP) said:
try these command from the Vista:

1. net view \\win2000ipaddtess.
2. net view \\win2000hostname

Do you receive any system errors?

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
Hi, I have a little workgroup. I have a printer server running 2000
Pro, 5
PCs running XP, and 2 Laptops running Vista.
I can print and access the files in the 2000 Pro server from any XP PC.
From
both Laptops running vista I can see all the computers in the
workgroup, I
can also see the files and use the printer of any PC running XP. The
problem
is between Vista and 2000 Pro. I can access files in the Vista Laptops
from
the 2000 Pro Server, but I can not see any shared folder or use any
printer
in the 2000 Pro Server from the Vista Laptops. Each time I try to
connect
to
the 2000 Pro Server from the Vista laptops I get a logon dialog box; I
defined in the 2000 Pro server the same users I have in the Vista
laptops
(I
did't do so for the XP PCs and they work just fine) and no matter what
user I
use to logon (I try to use also the 2000 Pro administrator user) I
always
get
a "Logon Unsucessful" error.
The vista and 2000 Pro has the NetBUI on TCP/IP enabled.
What can I do??
Click to expand...
Click to expand...
Click to expand...
 
R

Robert L. \(MS-MVP\)

You must give a space between "net view" "\\ip".

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
Ibrahim said:
Yes, and the hostname with the computer name. I wrote the following:
net view\\192.168.0.102 and net view\\Naa


--
Ibrahim


Robert L. (MS-MVP) said:
Did you replace win2000ipaddress with the win 2000 IP address?

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
Ibrahim said:
For both commands I get the following:

The syntax of this command is:
NET
[ACCOUNTS | COMPUTER | CONFIG | CONTINUE | FILE | GROUP | HELP |
HELPMSG |
LOCALGROUP | PAUSE | PRINT | SESSION | SHARE | START | STATISTICS |
STOP
|TIME | USE | USER | VIEW]

--
Ibrahim


:

try these command from the Vista:

1. net view \\win2000ipaddtess.
2. net view \\win2000hostname

Do you receive any system errors?

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
Hi, I have a little workgroup. I have a printer server running 2000
Pro, 5
PCs running XP, and 2 Laptops running Vista.
I can print and access the files in the 2000 Pro server from any XP
PC.
From
both Laptops running vista I can see all the computers in the
workgroup, I
can also see the files and use the printer of any PC running XP. The
problem
is between Vista and 2000 Pro. I can access files in the Vista
Laptops
from
the 2000 Pro Server, but I can not see any shared folder or use any
printer
in the 2000 Pro Server from the Vista Laptops. Each time I try to
connect
to
the 2000 Pro Server from the Vista laptops I get a logon dialog box;
I
defined in the 2000 Pro server the same users I have in the Vista
laptops
(I
did't do so for the XP PCs and they work just fine) and no matter
what
user I
use to logon (I try to use also the 2000 Pro administrator user) I
always
get
a "Logon Unsucessful" error.
The vista and 2000 Pro has the NetBUI on TCP/IP enabled.
What can I do??
Click to expand...
Click to expand...
Click to expand...
 
I

Ibrahim

Ok, I got and error, but i don't remember exactly which one, I will be back
to you Monday morning; thanks a lot for your help
--
Ibrahim


Robert L. (MS-MVP) said:
You must give a space between "net view" "\\ip".

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
Ibrahim said:
Yes, and the hostname with the computer name. I wrote the following:
net view\\192.168.0.102 and net view\\Naa


--
Ibrahim


Robert L. (MS-MVP) said:
Did you replace win2000ipaddress with the win 2000 IP address?

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
For both commands I get the following:

The syntax of this command is:
NET
[ACCOUNTS | COMPUTER | CONFIG | CONTINUE | FILE | GROUP | HELP |
HELPMSG |
LOCALGROUP | PAUSE | PRINT | SESSION | SHARE | START | STATISTICS |
STOP
|TIME | USE | USER | VIEW]

--
Ibrahim


:

try these command from the Vista:

1. net view \\win2000ipaddtess.
2. net view \\win2000hostname

Do you receive any system errors?

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
Hi, I have a little workgroup. I have a printer server running 2000
Pro, 5
PCs running XP, and 2 Laptops running Vista.
I can print and access the files in the 2000 Pro server from any XP
PC.
From
both Laptops running vista I can see all the computers in the
workgroup, I
can also see the files and use the printer of any PC running XP. The
problem
is between Vista and 2000 Pro. I can access files in the Vista
Laptops
from
the 2000 Pro Server, but I can not see any shared folder or use any
printer
in the 2000 Pro Server from the Vista Laptops. Each time I try to
connect
to
the 2000 Pro Server from the Vista laptops I get a logon dialog box;
I
defined in the 2000 Pro server the same users I have in the Vista
laptops
(I
did't do so for the XP PCs and they work just fine) and no matter
what
user I
use to logon (I try to use also the 2000 Pro administrator user) I
always
get
a "Logon Unsucessful" error.
The vista and 2000 Pro has the NetBUI on TCP/IP enabled.
What can I do??
Click to expand...
Click to expand...
Click to expand...
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Logon Problem between Vista and 2000 Pro 2
Vista-2000 Pro Printer sharing problem 2
Networking problem: Windows 2000 pro with Vista Home Basics 2
VISTA not seeing XP 5
Home networking problem 2
XP to Vista connection sharing 6
Windows Vista network problem with Win2k Server 3
Seeing Vista PC from networked laptops 1

Top