USB on the A7S333--Connect Where?

[W. Wat son]

I have the typical hook up on the board of two USB ports on the panel that
contains the keyboard, monitor, etc. There's a small card (4"x2") on the
back that is plugged into USB_34 (maybe 56). My front panel has two USB
plugs on it. Two bundles emerge with four wires each: D+, D-, ground, and
VCC. Where do I hook these guys to on the board. My manual is not clear on
this. It's clear how to do this with a multi-lug (8pins?). I don't see that
any of these ports are USB2. Is that correct?
--
Wayne T. Watson (Watson Adventures, Prop., Nevada City, CA)
(121.015 Deg. W, 39.262 Deg. N) GMT-8 hr std. time)
Obz Site: 39° 15' 7" N, 121° 2' 32" W, 2700 feet

Most vehicle/deer accidents occur at sunset.
Vehicle deer whistles are ineffective.

Web Page: <home.earthlink.net/~mtnviews>

 

[KC Computers]

I have the typical hook up on the board of two USB ports on the panel that
contains the keyboard, monitor, etc. There's a small card (4"x2") on the
back that is plugged into USB_34 (maybe 56). My front panel has two USB
plugs on it. Two bundles emerge with four wires each: D+, D-, ground, and
VCC. Where do I hook these guys to on the board. My manual is not clear on
this. It's clear how to do this with a multi-lug (8pins?). I don't see that
any of these ports are USB2. Is that correct?

The A7S333 board does not have USB 2.0 ports so you would not
to add a separate PCI card for that. For the connections, you need
to connect each wire as folllows.

Pin 1 on Mbrd: VCC
Pin 2 on Mbrd: D-
Pin 3 on Mbrd: D+
Pin 4 on Mbrd: GND

Do the same thing for both rows of pins.

 

[W. Wat son]

The A7S333 board does not have USB 2.0 ports so you would not
to add a separate PCI card for that. For the connections, you need
to connect each wire as folllows.

Pin 1 on Mbrd: VCC
Pin 2 on Mbrd: D-
Pin 3 on Mbrd: D+
Pin 4 on Mbrd: GND

Do the same thing for both rows of pins.

Thanks. Did you mean to say add a PCI card for USB2?

--
Wayne T. Watson (Watson Adventures, Prop., Nevada City, CA)
(121.015 Deg. W, 39.262 Deg. N) GMT-8 hr std. time)
Obz Site: 39° 15' 7" N, 121° 2' 32" W, 2700 feet

Most vehicle/deer accidents occur at sunset.
Vehicle deer whistles are ineffective.

Web Page: <home.earthlink.net/~mtnviews>

 

[Paul]

The A7S333 board does not have USB 2.0 ports so you would not
to add a separate PCI card for that. For the connections, you need
to connect each wire as folllows.

Pin 1 on Mbrd: VCC
Pin 2 on Mbrd: D-
Pin 3 on Mbrd: D+
Pin 4 on Mbrd: GND

Do the same thing for both rows of pins.

There is a nice picture on PDF page 49. VCC is the same thing
as USB_Power:

http://www.asus.com/pub/ASUS/mb/socka/sis745/a7s333/e982_a7s333.pdf

Paul