USB (for iPod) problem

  • Thread starter Thread starter Zgirl
  • Start date Start date
Z

Zgirl

when connecting my iPod to the USB port i get a small error message at the
bottom of my screen w/ yellow exclamation mark saying that the USB device is
not recognized (or has malfunctioned)...or sometimes saying something like
"Hi-Speed device plugged into a non hi-speed port." I have USB 2.0.

Any ideas on what I can do to fix this??
 
You will need to have SP1 installed to enable USB2 is SP1 installed.

Neil
 
do you have a usb hub plugged into your comp? if so it
may not be a 2.0 hub.
don
 
Zgirl said:
i don't think i have a hub plugged in... how do i know?
Click to expand...

You look at your USB port. You follow it to the appliance. If you find a
hub between your computer's USB port and the appliance, you have a hub
plugged in.
 
Use the window's update feature to go to the Ms udpdate site. It will
scan your computer and tell you what updates you need. If you don't
have sP1 installed it will tell you that.
 
i have sp1 installed

i think its a problem with the usb cord itself...apple said it's a common
problem
 
You must log in or register to reply here.

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

USB complains about not being high speed. 11
ipod & usb 7
USB problem 8
Undetectable USB Modem & iPod Nano 3
problem installing this hardware-Apple IPOD USB driver- 2
USB devices not detected 8
USB Device Not Recognized 7
USB and Ipod Help 2

Back
Top