upgraded hardware

G

Guest

Am I going to have any problems with xp home after I upgrade my motherboard,
cpu memory and video card tomorrow? I have xp home sp2 with ie 7 and all the
updates. My original xp cd is xp with sp1. I did make a slipstream just for
backup. I'm updating from an AMD +2600 xp to an AMD ams dx 3800 with 2 gigs
ddr2 and a pci express video card. I don't want problems with having to do
any updates except the boards disk and the video cards software. I have a
lot of stuff installed and don't want to have to install it again.
 
D

DL

You would be advised to undertake a repair installation of winxp
And since the origonal winxp cd is sp1 you would need to create a
slipstreamed cd containing the latest sp.

The new hw wont be recognised by win, so its likely win will not boot,
unless you do the repair installation.
 
B

Bruce Chambers

John said:
Am I going to have any problems with xp home after I upgrade my motherboard,
cpu memory and video card tomorrow? I have xp home sp2 with ie 7 and all the
updates. My original xp cd is xp with sp1. I did make a slipstream just for
backup. I'm updating from an AMD +2600 xp to an AMD ams dx 3800 with 2 gigs
ddr2 and a pci express video card. I don't want problems with having to do
any updates except the boards disk and the video cards software. I have a
lot of stuff installed and don't want to have to install it again.


Normally, and assuming a retail license (many factory-installed OEM
installations are BIOS-locked to a specific chipset and therefore are
*not* transferable to a new motherboard - check yours before starting),
unless the new motherboard is virtually identical (same chipset, same
IDE controllers, same BIOS version, etc.) to the one on which the WinXP
installation was originally performed, you'll need to perform a repair
(a.k.a. in-place upgrade) installation, at the very least:

How to Perform an In-Place Upgrade of Windows XP
http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q315341

Changing a Motherboard or Moving a Hard Drive with WinXP Installed
http://www.michaelstevenstech.com/moving_xp.html

The "why" is quite simple, really, and has nothing to do with
licensing issues, per se; it's a purely technical matter, at this point.
You've pulled the proverbial hardware rug out from under the OS. (If
you don't like -- or get -- the rug analogy, think of it as picking up a
Cape Cod style home and then setting it down onto a Ranch style
foundation. It just isn't going to fit.) WinXP, like Win2K before it,
is not nearly as "promiscuous" as Win9x when it comes to accepting any
old hardware configuration you throw at it. On installation it
"tailors" itself to the specific hardware found. This is one of the
reasons that the entire WinNT/2K/XP OS family is so much more stable
than the Win9x group.

As always when undertaking such a significant change, back up any
important data before starting.

This will also probably require re-activation, unless you have a
Volume Licensed version of WinXP Pro installed. If it's been more than
120 days since you last activated that specific Product Key, you'll most
likely be able to activate via the Internet without problem. If it's
been less, you might have to make a 5 minute phone call.


--

Bruce Chambers

Help us help you:



They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety. -Benjamin Franklin

Many people would rather die than think; in fact, most do. -Bertrand Russell
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top