TS doesn't connect to client printer on COM1

B

Bob

Windows 2000 terminal services - when I connect from TS
client, the server connects to the client printer on the
com port but not the printer on LPT1. On the TS server, I
made sure that LPT port mapping is not disabled. I have
checked the box "connect client printers at logon" in
client settings. Any ideas?
Thanks,
Bob
 
G

Guest

Check here
http://www.workthin.com/tsp.ht

Patrick Rous
Microsoft MVP - Terminal Serve
http://www.workthin.co

----- Bob wrote: ----

Windows 2000 terminal services - when I connect from TS
client, the server connects to the client printer on the
com port but not the printer on LPT1. On the TS server, I
made sure that LPT port mapping is not disabled. I have
checked the box "connect client printers at logon" in
client settings. Any ideas
Thanks
Bo
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

printer sharenames change by themselves 2
Add Client Com port for serial communication at TS server 1
TS Printer Configuration w/Epson Receipt Printer 1
Printing from TS 5
TS 2000 and XP Pro client printing issue 4
TS Licensing problem 5
TS printer paper size set to letter and I want A4! (yes, again same problem, but W2K3 TS this time) 0
MS-DOS Aplication Printing to TS Client 1

Top