Trouble burning ISO's

R

Rob

I'm having some trouble burning cd's. I have ezcd creator and a couple of
weeks ago I burned some linux ISOs no problem. I needed to burn a couple
more cds and this time around it got stuck at 12% and the program crashed. I
tried a few times and it kept hanging at 12%. So, I tried downloading a
trial version of nero and I got errors also. Nothing has changed over the
last couple of weeks so I don't know what the problem is. I'm using the same
cd-rs that worked before and I've tried using a few different discs just
incase it had ruined the previous ones it errored on.

EZ CD Creator didn't give me any error messages but nero did.


1C83-7617-10E5-477X-4022-6KM9-****

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created
8/14/2002 4:03:36 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll':
Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

NT-SPTI used
Nero Version: 7.5.1.1
Internal Version: 7, 5, 1, 1

Recorder: <_NEC NR-7900A> Version: 1.08 - HA 1 TA 0 -
7.5.1.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <_NEC NR-7900A >Version: 1.08 - HA 1 TA 0 -
7.5.1.1
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340016A atapi Port 0 ID 0
DMA: On
CdRomPeripheral : _NEC NR-7900A atapi Port 1 ID 0
DMA: On

=== CDRom-Device-Map ===
_NEC NR-7900A E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1047564kB)
Free physical memory: 527MB (540424kB)
Memory in use : 48 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.10.2006
CD Image
10:09:36 AM #1 Text 0 File Burncd.cpp, Line 3129
_NEC NR-7900A
JustLink activated

10:09:36 AM #2 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 81920KB of Memory

10:09:36 AM #3 Text 0 File Reader.cpp, Line 126
Reader running

10:09:36 AM #4 Text 0 File Writer.cpp, Line 123
Writer E: _NEC NR-7900A running

10:09:36 AM #5 Text 0 File Burncd.cpp, Line 3443
Turn on Track-At-Once, using CD-R/RW media

10:09:36 AM #6 Text 0 File DlgWaitCD.cpp, Line 300
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 275219 ( 61:11.44)

10:09:36 AM #7 Text 0 File DlgWaitCD.cpp, Line 312
Write in overburning mode: NO (enabled: CD)

10:09:36 AM #8 Text 0 File DlgWaitCD.cpp, Line 2851
Recorder: _NEC NR-7900A;
CDR code: 00 97 24 16; OSJ entry from: SONY Corporation
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 18 10 (LI 97:24.16), 3: 4F 3B
4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3:
00 00 00 (invalid)

10:09:36 AM #9 Text 0 File DlgWaitCD.cpp, Line 484=========================================

10:09:36 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 863
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 275220 (275220) = #275220/61:9.45
relocatable, disc pos for caching/writing not required/not required,
patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
275218 blocks [E: _NEC NR-7900A]
--------------------------------------------------------------

10:09:36 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1079
Prepare recorder [E: _NEC NR-7900A] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1
Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200
563957760, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 275220 | 275070 | 0x00
0 | 1 | 1 | 0x41 | 275220 | 275220 | 0x00
275220 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

10:09:36 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1149
Removed 2 run-out blocks from end of track 1. Length: 275220 -> 275218.

10:09:36 AM #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

10:09:36 AM #14 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

10:09:36 AM #15 Text 0 File Burncd.cpp, Line 4274
Cache writing successful.

10:09:36 AM #16 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

10:09:36 AM #17 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 8x (1,200 KB/s)

10:09:36 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2746
Verifying disc position of item 0 (relocatable, no disc pos, patch infos,
orig at #0): write at #0

10:09:36 AM #19 Text 0 File MMC.cpp, Line 22129
Set BUFE: JustLink -> ON

10:09:42 AM #20 SPTI -1106 File SCSIPassThrough.cpp, Line 291
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x0b970000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

10:09:42 AM #21 CDR -1106 File Writer.cpp, Line 312
Power calibration error
E: _NEC NR-7900A

10:09:42 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

10:09:42 AM #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

10:09:42 AM #24 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
E: _NEC NR-7900A

10:09:42 AM #25 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack

10:09:42 AM #26 Text 0 File MMC.cpp, Line 16933
<_NEC NR-7900A > start Close Session

10:09:42 AM #27 SPTI -1176 File SCSIPassThrough.cpp, Line 291
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 04

10:09:42 AM #28 CDR -1176 File WriterStatus.cpp, Line 250
Session fixation error
E: _NEC NR-7900A

10:09:42 AM #29 TRANSFER -19 File WriterStatus.cpp, Line 250
Could not perform Fixation

10:09:42 AM #30 Text 0 File WriterStatus.cpp, Line 259
falling back to disc fixation

10:09:42 AM #31 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 8x (1,200 KB/s)


Existing drivers:
File 'Drivers\CDUDF.SYS': Ver=5.02 (155), size=229664 bytes, created
5/17/2001 4:28:26 PM
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created
8/24/2006 8:47:00 PM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created
8/14/2002 4:03:36 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created
8/24/2006 8:47:00 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs :
0 (Security Option)
 
L

LittleMoo

Here is one persons fix for that power calibration error on GIDForums:
http://www.gidforums.com/t-1805.html

You can also look through google search results here:
http://www.google.com/search?q=cd+d...ient=firefox-a&rls=org.mozilla:en-US:official

-Dan

Rob said:
I'm having some trouble burning cd's. I have ezcd creator and a couple of
weeks ago I burned some linux ISOs no problem. I needed to burn a couple
more cds and this time around it got stuck at 12% and the program crashed.
I tried a few times and it kept hanging at 12%. So, I tried downloading a
trial version of nero and I got errors also. Nothing has changed over the
last couple of weeks so I don't know what the problem is. I'm using the
same cd-rs that worked before and I've tried using a few different discs
just incase it had ruined the previous ones it errored on.

EZ CD Creator didn't give me any error messages but nero did.


1C83-7617-10E5-477X-4022-6KM9-****

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created
8/14/2002 4:03:36 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll':
Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

NT-SPTI used
Nero Version: 7.5.1.1
Internal Version: 7, 5, 1, 1

Recorder: <_NEC NR-7900A> Version: 1.08 - HA 1 TA
0 - 7.5.1.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <_NEC NR-7900A >Version: 1.08 - HA 1 TA
0 - 7.5.1.1
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340016A atapi Port 0 ID 0
DMA: On
CdRomPeripheral : _NEC NR-7900A atapi Port 1 ID 0
DMA: On

=== CDRom-Device-Map ===
_NEC NR-7900A E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1047564kB)
Free physical memory: 527MB (540424kB)
Memory in use : 48 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.10.2006
CD Image
10:09:36 AM #1 Text 0 File Burncd.cpp, Line 3129
_NEC NR-7900A
JustLink activated

10:09:36 AM #2 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 81920KB of Memory

10:09:36 AM #3 Text 0 File Reader.cpp, Line 126
Reader running

10:09:36 AM #4 Text 0 File Writer.cpp, Line 123
Writer E: _NEC NR-7900A running

10:09:36 AM #5 Text 0 File Burncd.cpp, Line 3443
Turn on Track-At-Once, using CD-R/RW media

10:09:36 AM #6 Text 0 File DlgWaitCD.cpp, Line 300
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 275219 ( 61:11.44)

10:09:36 AM #7 Text 0 File DlgWaitCD.cpp, Line 312
Write in overburning mode: NO (enabled: CD)

10:09:36 AM #8 Text 0 File DlgWaitCD.cpp, Line 2851
Recorder: _NEC NR-7900A;
CDR code: 00 97 24 16; OSJ entry from: SONY Corporation
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 18 10 (LI 97:24.16), 3: 4F
3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid),
3: 00 00 00 (invalid)

10:09:36 AM #9 Text 0 File DlgWaitCD.cpp, Line 484=========================================

10:09:36 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 863
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 275220 (275220) = #275220/61:9.45
relocatable, disc pos for caching/writing not required/not required,
patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
275218 blocks [E: _NEC NR-7900A]
--------------------------------------------------------------

10:09:36 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1079
Prepare recorder [E: _NEC NR-7900A] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next
Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200
563957760, ISRC ""
DAO layout:
===========

___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 275220 | 275070 | 0x00
0 | 1 | 1 | 0x41 | 275220 | 275220 | 0x00
275220 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

10:09:36 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1149
Removed 2 run-out blocks from end of track 1. Length: 275220 -> 275218.

10:09:36 AM #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

10:09:36 AM #14 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

10:09:36 AM #15 Text 0 File Burncd.cpp, Line 4274
Cache writing successful.

10:09:36 AM #16 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

10:09:36 AM #17 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 8x (1,200 KB/s)

10:09:36 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2746
Verifying disc position of item 0 (relocatable, no disc pos, patch infos,
orig at #0): write at #0

10:09:36 AM #19 Text 0 File MMC.cpp, Line 22129
Set BUFE: JustLink -> ON

10:09:42 AM #20 SPTI -1106 File SCSIPassThrough.cpp, Line 291
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x0b970000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

10:09:42 AM #21 CDR -1106 File Writer.cpp, Line 312
Power calibration error
E: _NEC NR-7900A

10:09:42 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

10:09:42 AM #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

10:09:42 AM #24 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
E: _NEC NR-7900A

10:09:42 AM #25 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack

10:09:42 AM #26 Text 0 File MMC.cpp, Line 16933
<_NEC NR-7900A > start Close Session

10:09:42 AM #27 SPTI -1176 File SCSIPassThrough.cpp, Line 291
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 04

10:09:42 AM #28 CDR -1176 File WriterStatus.cpp, Line 250
Session fixation error
E: _NEC NR-7900A

10:09:42 AM #29 TRANSFER -19 File WriterStatus.cpp, Line 250
Could not perform Fixation

10:09:42 AM #30 Text 0 File WriterStatus.cpp, Line 259
falling back to disc fixation

10:09:42 AM #31 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 8x (1,200 KB/s)


Existing drivers:
File 'Drivers\CDUDF.SYS': Ver=5.02 (155), size=229664 bytes, created
5/17/2001 4:28:26 PM
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created
8/24/2006 8:47:00 PM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created
8/14/2002 4:03:36 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created
8/24/2006 8:47:00 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs
: 0 (Security Option)
Click to expand...
 
R

Rob

Darn, maybe my drive just went out but it just seems unlikely because I've
maybe burned 50 cds since I've had this pc. I can say the media is fine with
pretty good certainty because I used the same media a couple weeks ago to
burn about 8 cds.

I guess I'll know for sure when I swap out the rw from another pc and see
the same problem... or not.
 
R

Rob

Well, I took the same media to my neighboring pc and burned the same image
without error so I guess it is my drive :/

Thanks for the help.
 
R

Richard Urban

1. Drives don't have a timetable as to when they go bad.

2. I have seen failure rates of about 20% in a pack of 50 CD's and
DVD's.

It's amazing at how many people who have an expensive computer will scrimp
on their media to save a few bucks. Get the very best CD's and DVD's you
can. Look at reviews in on line computer magazines for ratings.

Personally, I always use Sony media with my Sony burners. Invariably, when I
call Sony they say that the media is defective. HA! Gotcha buddy. Send me
new media.

I have gotten hundreds of free DVD's this way.

--

Regards,

Richard Urban
Microsoft MVP Windows Shell/User
(For email, remove the obvious from my address)

Quote from George Ankner:
If you knew as much as you think you know,
You would realize that you don't know what you thought you knew!
 
L

LittleMoo

R

R. McCarty

I've tried numerous brands and use ( or try to use ) Sony or Imation.
Given a choice, I'll stay away from Memorex, especially any of their
RW media.
 
R

Rob

I did try the first link and it didn't work for me.

Btw, I am using sony media. and the drive is oem with my dell.
 
L

LittleMoo

How about trying to put the drive in another computer and seeing if it works
on that one?
This way you'll know for sure if the drive is defective.

-Dan
 
R

R. McCarty

Download Nero Tool to verify the Optical's capabilities. Also,
CD/DVD recorders have frequent Firmware Flash updates to
fix issues or improve burning speeds. Use your Service Tag #
at Dell's site to see if your Optical drive has any firmware flash
updates available. Since Dell uses other Mfg's units, you may
have to capture it's Device ID and go straight to the vendor's
website.
Nero Info Tool Download here:
http://www.cdspeed2000.com/go.php3?link=download.html
**Stand-Alone tool, doesn't require installation.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

How best to deal w/ master boot record virus 6
neo 8 will not burn right video dvd 1
OT: Nero / unable to make bootable cd-r 2
Problem writing CD / DVD's ? ATAPI iHAS124 B 5
problems with dvd burner 2
Getting Burn Error 1
Problem installation IE 8 with WSUS on Windows XP SP2 clients 1
5 consecutively fail in burning DVD+R DL.... 7

Top