Problem installation IE 8 with WSUS on Windows XP SP2 clients

K

KSC

Dear,

I try to install IE 8 through WSUS on Windows XP SP2 clients, but without
success, is the error in the log file the cause? ERROR: Couldn't read
value: 'LIPPackage' from [Version] section in update.inf


00:00.000:
====================================================================

00:00.125: Started: 2009/09/10 (Y/M/D) 14:52:38.075 (local)

00:00.140: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds)

00:00.156: Command line: f:\8accc5038729beaaae0194\update\iesetup.exe
/wu-silent

00:00.187: INFO: Checking version for
f:\8accc5038729beaaae0194\update\iesetup.exe: 8.0.6001.18702

00:00.296: INFO: Acquired Package Installer Mutex

00:00.312: INFO: Operating System: Windows Workstation: 5.1.2600 (Service
Pack 2)

00:00.515: ERROR: Couldn't read value: 'LIPPackage' from [Version] section
in update.inf

00:00.531: INFO: Checking Prerequisites

00:00.562: INFO: Checking version for C:\WINDOWS\system32\msctf.dll:
5.1.2600.2180

00:00.578: INFO: Prerequisites Satisfied: No

00:00.640: INFO: Checking version for C:\Program Files\Internet
Explorer\iexplore.exe: 7.0.6000.16876

00:00.671: INFO: C:\Program Files\Internet Explorer\iexplore.exe version:
7.0.6000.16876

00:00.687: INFO: Checking if iexplore.exe's current version is between
8.0.6001.0...

00:00.718: INFO: ...and 8.1.0.0...

00:00.734: INFO: Maximum version on which to run IEAK branding is:
8.1.0.0...

00:00.750: INFO: iexplore.exe version check success. Install can proceed.

00:00.781: INFO: Checking version for C:\Program Files\Internet
Explorer\iexplore.exe: 7.0.6000.16876

00:00.796: INFO: Checking version for C:\WINDOWS\system32\mshtml.dll:
7.0.6000.16890

00:00.828: INFO: Checking version for C:\WINDOWS\system32\wininet.dll:
7.0.6000.16876

00:00.906: INFO: EULA not shown in passive or quiet mode.

00:00.937: INFO: Skip directly to Options page.

00:01.000: INFO: |PreInstall >>> CPageProgress::DlgProc: Exiting
Phase PH_NONE

00:01.015: INFO: |PreInstall >>> CPageProgress::_ChangeState:
Original Phase: 0

00:01.031: INFO: |Initialize >>> CPageProgress::_UpdateDisplay:
Actual Phase: 1

00:01.062: INFO: |Initialize >>>
[BEGIN]------------------------------
Click to expand...

00:01.078: INFO: |Initialize >>> CPageProgress::_UpdateDisplay:
Actual Phase: 1

00:01.093: INFO: |Initialize >>> SKIP[FALSE]>>Looking for skip
clauses

00:01.125: INFO: |Initialize >>> SKIP[FALSE]>>Result: RUNNING This
Phase

00:01.140: INFO: |Initialize >>> Calculating bytes needed to install.

00:01.171: INFO: |Initialize >>> Diskspace Required: 151918308

00:01.187: INFO: |Initialize >>> Diskspace Available to user:
26173431808

00:01.265: INFO: WindowsUpdate>>CWindowsUpdateMgr::Initialize:
CoCreateInstance.CLSID_UpdateSession: HResult 0x00000000

00:01.296: INFO: WindowsUpdate>>CWindowsUpdateMgr::Initialize:
PutClientApplicationID: HResult 0x00000000

00:01.312: INFO: WindowsUpdate>>CWindowsUpdateMgr::Initialize:
CreateUpdateSearcher: HResult 0x00000000

00:01.343: INFO: WindowsUpdate>>CWindowsUpdateMgr::Initialize:
CreateUpdateDownloader: HResult 0x00000000

00:01.359: INFO: WindowsUpdate>>CWindowsUpdateMgr::Initialize:
CreateUpdateInstaller: HResult 0x00000000

00:01.375: INFO: WindowsUpdate>>WindowsUpdateMgr::Initialize: State
Change: SS_INITIALIZED.

00:01.406: INFO: |Initialize >>> CStateInitialize::OnInitialize:
Windows Update Manager Initialization Result: 0x00000000

00:01.421: INFO: |Initialize >>> CInstallationState::_ExitState:
Preparing to Leave State.

00:01.437: INFO: |Initialize >>> CInstallationState::_ExitState:
Setting Progress 100.

00:01.468: INFO: |Initialize >>> CInstallationState::_SetProgress:
Post Set Progress Message Succeeded.

00:01.484: INFO: |Initialize >>> CInstallationState::_ExitState:
Posting Exit Phase Message.

00:01.500: INFO: |Initialize >>> CInstallationState::_ExitState:
Post Exit Phase Message Succeeded.

00:01.531: INFO: |Initialize >>> CPageProgress::DlgProc: Received
WM_PR_SETPROGRESS, 64, 0

00:01.546: INFO: |Initialize >>> CPageProgress::_UpdateDisplay:
Actual Phase: 1

00:01.578: INFO: |Initialize >>> CPageProgress::DlgProc: Received
WM_PR_EXITPHASE, 0, 0

00:01.593: INFO: |Initialize >>> CPageProgress::_UpdateDisplay:
Actual Phase: 1

00:01.609: INFO: |Initialize >>>
<[END]--------------------------------

00:01.625: INFO: |Initialize >>> CPageProgress::_ChangeState:
Original Phase: 1

00:01.656: INFO: |Uninstall Prev. >>>
[BEGIN]------------------------------
Click to expand...

00:01.671: INFO: |Uninstall Prev. >>> CPageProgress::_UpdateDisplay:
Actual Phase: 2

00:01.687: INFO: |Uninstall Prev. >>> SKIP[FALSE]>>Looking for skip
clauses

00:01.718: INFO: |Uninstall Prev. >>> SKIP[FALSE]>> Adding [FALSE]
Condition: !_psdStateData->GetIsInitSuccessful()

00:01.734: INFO: |Uninstall Prev. >>> SKIP[FALSE]>> Adding [TRUE ]
Condition: !g_pApp->GetState()->AreWeDoingUninstall()

00:01.750: INFO: |Uninstall Prev. >>> SKIP[TRUE ]>>Result: SKIPPING This
Phase

00:01.781: INFO: |Uninstall Prev. >>> CInstallationState::_ExitState:
Preparing to Leave State.

00:01.796: INFO: |Uninstall Prev. >>> CInstallationState::_ExitState:
Setting Progress 100.

00:01.812: INFO: |Uninstall Prev. >>> CInstallationState::_SetProgress:
Post Set Progress Message Succeeded.

00:01.843: INFO: |Uninstall Prev. >>> CInstallationState::_ExitState:
Posting Exit Phase Message.

00:01.859: INFO: |Uninstall Prev. >>> CInstallationState::_ExitState:
Post Exit Phase Message Succeeded.

00:01.875: INFO: |Uninstall Prev. >>> CPageProgress::DlgProc: Received
WM_PR_SETPROGRESS, 64, 0

00:01.906: INFO: |Uninstall Prev. >>> CPageProgress::_UpdateDisplay:
Actual Phase: 2

00:01.921: INFO: |Uninstall Prev. >>> CPageProgress::DlgProc: Received
WM_PR_EXITPHASE, 0, 0

00:01.937: INFO: |Uninstall Prev. >>> CPageProgress::_UpdateDisplay:
Actual Phase: 2

00:01.968: INFO: |Uninstall Prev. >>>
<[END]--------------------------------

00:01.984: INFO: |Uninstall Prev. >>> CPageProgress::_ChangeState:
Original Phase: 2

00:02.000: INFO: |WU Download >>>
[BEGIN]------------------------------
Click to expand...

00:06.609: INFO: |Inst. Post-Upd. >>>
[BEGIN]------------------------------
Click to expand...

00:06.625: INFO: |Inst. Post-Upd. >>> CPageProgress::_UpdateDisplay:
Actual Phase: 10

00:06.656: INFO: |Inst. Post-Upd. >>> SKIP[FALSE]>>Looking for skip
clauses

00:06.671: INFO: |Inst. Post-Upd. >>> SKIP[FALSE]>> Adding [FALSE]
Condition: !_psdStateData->GetIsInitSuccessful()

00:06.687: INFO: |Inst. Post-Upd. >>> SKIP[FALSE]>> Adding [FALSE]
Condition: !g_pApp->GetState()->GetOptShouldUpdate()

00:06.718: INFO: |Inst. Post-Upd. >>> SKIP[FALSE]>> Adding [TRUE ]
Condition: !g_pApp->GetState()->GetResultCouldInstallIE()

00:06.734: INFO: |Inst. Post-Upd. >>> SKIP[TRUE ]>> Adding [TRUE ]
Condition: g_pApp->GetState()->GetResultPostIEUpdateState()!=WU_COULD_DOWNLOAD

00:06.750: INFO: |Inst. Post-Upd. >>> SKIP[TRUE ]>> Adding [FALSE]
Condition: g_pApp->GetState()->GetOptIEAKMode()==IEAK_BRANDING

00:06.781: INFO: |Inst. Post-Upd. >>> SKIP[TRUE ]>> Adding [FALSE]
Condition: g_pApp->GetState()->AreWeDoingUninstall()

00:06.796: INFO: |Inst. Post-Upd. >>> SKIP[TRUE ]>> Adding [TRUE ]
Condition: !g_pApp->GetState()->GetPrerequisiteSatisfied()

00:06.812: INFO: |Inst. Post-Upd. >>> SKIP[TRUE ]>>Result: SKIPPING This
Phase

00:06.843: INFO: |Inst. Post-Upd. >>> CInstallationState::_ExitState:
Preparing to Leave State.

00:06.859: INFO: |Inst. Post-Upd. >>> CInstallationState::_ExitState:
Setting Progress 100.

00:06.875: INFO: |Inst. Post-Upd. >>> CInstallationState::_SetProgress:
Post Set Progress Message Succeeded.

00:06.906: INFO: |Inst. Post-Upd. >>> CInstallationState::_ExitState:
Posting Exit Phase Message.

00:06.921: INFO: |Inst. Post-Upd. >>> CInstallationState::_ExitState:
Post Exit Phase Message Succeeded.

00:06.937: INFO: |Inst. Post-Upd. >>> CPageProgress::DlgProc: Received
WM_PR_SETPROGRESS, 64, 0

00:06.968: INFO: |Inst. Post-Upd. >>> CPageProgress::_UpdateDisplay:
Actual Phase: 10

00:06.984: INFO: |Inst. Post-Upd. >>> CPageProgress::DlgProc: Received
WM_PR_EXITPHASE, 0, 0

00:07.000: INFO: Setting Windows Update Registry Keys:
LookingForUpdates=0x00 - ForcePostUpdateDownload=0x00 -
ForcePostUpdateInstall=0x00

00:07.031: INFO: |Inst. Post-Upd. >>> CPageProgress::_UpdateDisplay:
Actual Phase: 10

00:07.046: INFO: |Inst. Post-Upd. >>>
<[END]--------------------------------

00:07.062: INFO: |Inst. Post-Upd. >>> CPageProgress::_ChangeState:
Original Phase: 10

00:07.093: INFO: |IEAK After IEUPD >>>
[BEGIN]------------------------------
Click to expand...

00:07.109: INFO: |IEAK After IEUPD >>> CPageProgress::_UpdateDisplay:
Actual Phase: 11

00:07.125: INFO: |IEAK After IEUPD >>> SKIP[FALSE]>>Looking for skip
clauses

00:07.156: INFO: |IEAK After IEUPD >>> SKIP[FALSE]>> Adding [FALSE]
Condition: !_psdStateData->GetIsInitSuccessful()

00:07.171: INFO: |IEAK After IEUPD >>> SKIP[FALSE]>> Adding [TRUE ]
Condition: g_pApp->GetState()->GetOptIEAKMode()!=IEAK_PACKAGE

00:07.187: INFO: |IEAK After IEUPD >>> SKIP[TRUE ]>> Adding [FALSE]
Condition: g_pApp->GetState()->AreWeDoingUninstall()

00:07.218: INFO: |IEAK After IEUPD >>> SKIP[TRUE ]>> Adding [TRUE ]
Condition: !g_pApp->GetState()->GetPrerequisiteSatisfied()

00:07.312: INFO: |IEAK After IEUPD >>> SKIP[TRUE ]>>Result: SKIPPING This
Phase

00:07.328: INFO: |IEAK After IEUPD >>> CInstallationState::_ExitState:
Preparing to Leave State.

00:07.359: INFO: |IEAK After IEUPD >>> CInstallationState::_ExitState:
Setting Progress 100.

00:07.375: INFO: |IEAK After IEUPD >>> CInstallationState::_SetProgress:
Post Set Progress Message Succeeded.

00:07.406: INFO: |IEAK After IEUPD >>> CInstallationState::_ExitState:
Posting Exit Phase Message.

00:07.421: INFO: |IEAK After IEUPD >>> CInstallationState::_ExitState:
Post Exit Phase Message Succeeded.

00:07.437: INFO: |IEAK After IEUPD >>> CPageProgress::DlgProc: Received
WM_PR_SETPROGRESS, 64, 0

00:07.453: INFO: |IEAK After IEUPD >>> CPageProgress::_UpdateDisplay:
Actual Phase: 11

00:07.484: INFO: |IEAK After IEUPD >>> CPageProgress::DlgProc: Received
WM_PR_EXITPHASE, 0, 0

00:07.500: INFO: |IEAK After IEUPD >>> CPageProgress::_UpdateDisplay:
Actual Phase: 11

00:07.531: INFO: |IEAK After IEUPD >>>
<[END]--------------------------------

00:07.562: INFO: |IEAK After IEUPD >>> CPageProgress::_ChangeState:
Original Phase: 11

00:07.609: INFO: |IEAK Finalize >>>
[BEGIN]------------------------------
Click to expand...

00:07.625: INFO: |IEAK Finalize >>> CPageProgress::_UpdateDisplay:
Actual Phase: 12

00:07.640: INFO: |IEAK Finalize >>> SKIP[FALSE]>>Looking for skip
clauses

00:07.671: INFO: |IEAK Finalize >>> SKIP[FALSE]>> Adding [FALSE]
Condition: !_psdStateData->GetIsInitSuccessful()

00:07.687: INFO: |IEAK Finalize >>> SKIP[FALSE]>> Adding [TRUE ]
Condition: g_pApp->GetState()->GetOptIEAKMode()==IEAK_NONE

00:07.703: INFO: |IEAK Finalize >>> SKIP[TRUE ]>> Adding [FALSE]
Condition: g_pApp->GetState()->AreWeDoingUninstall()

00:07.734: INFO: |IEAK Finalize >>> SKIP[TRUE ]>> Adding [TRUE ]
Condition: !g_pApp->GetState()->GetPrerequisiteSatisfied()

00:07.750: INFO: |IEAK Finalize >>> SKIP[TRUE ]>>Result: SKIPPING This
Phase

00:07.765: INFO: |IEAK Finalize >>> CInstallationState::_ExitState:
Preparing to Leave State.

00:07.796: INFO: |IEAK Finalize >>> CInstallationState::_ExitState:
Setting Progress 100.

00:07.812: INFO: |IEAK Finalize >>> CInstallationState::_SetProgress:
Post Set Progress Message Succeeded.

00:07.828: INFO: |IEAK Finalize >>> CInstallationState::_ExitState:
Posting Exit Phase Message.

00:07.859: INFO: |IEAK Finalize >>> CInstallationState::_ExitState:
Post Exit Phase Message Succeeded.

00:07.875: INFO: |IEAK Finalize >>> CPageProgress::DlgProc: Received
WM_PR_SETPROGRESS, 64, 0

00:07.890: INFO: |IEAK Finalize >>> CPageProgress::_UpdateDisplay:
Actual Phase: 12

00:07.921: INFO: |IEAK Finalize >>> CPageProgress::DlgProc: Received
WM_PR_EXITPHASE, 0, 0

00:07.937: INFO: |IEAK Finalize >>> CPageProgress::_UpdateDisplay:
Actual Phase: 12

00:07.953: INFO: |IEAK Finalize >>>
<[END]--------------------------------

00:07.984: INFO: |IEAK Finalize >>> CPageProgress::_ChangeState:
Original Phase: 12

00:08.000: INFO: |Finalize >>>
[BEGIN]------------------------------
Click to expand...

00:08.015: INFO: |Finalize >>> CPageProgress::_UpdateDisplay:
Actual Phase: 13

00:08.046: INFO: |Finalize >>> SKIP[FALSE]>>Looking for skip
clauses

00:08.062: INFO: |Finalize >>> SKIP[FALSE]>>Result: RUNNING This
Phase

00:08.078: INFO: |Finalize >>> CInstallationState::_ExitState:
Preparing to Leave State.

00:08.109: INFO: |Finalize >>> CInstallationState::_ExitState:
Setting Progress 100.

00:08.125: INFO: |Finalize >>> CInstallationState::_SetProgress:
Post Set Progress Message Succeeded.

00:08.140: INFO: |Finalize >>> CInstallationState::_ExitState:
Posting Exit Phase Message.

00:08.171: INFO: |Finalize >>> CInstallationState::_ExitState:
Post Exit Phase Message Succeeded.

00:08.187: INFO: |Finalize >>> CPageProgress::DlgProc: Received
WM_PR_SETPROGRESS, 64, 0

00:08.203: INFO: |Finalize >>> CPageProgress::_UpdateDisplay:
Actual Phase: 13

00:08.296: INFO: |Finalize >>> CPageProgress::DlgProc: Received
WM_PR_EXITPHASE, 0, 0

00:08.328: INFO: |Finalize >>> CPageProgress::_UpdateDisplay:
Actual Phase: 13

00:08.343: INFO: |Finalize >>>
<[END]--------------------------------

00:08.359: INFO: |Finalize >>> CPageProgress::_ChangeState:
Original Phase: 13

00:11.046: INFO: REBOOT: not needed.

00:11.062: INFO: REBOOT: not needed.

00:11.093: INFO: Installer return value: hr=0x00000000

00:11.125: INFO: Setup exit code: 0x00000000.
 
P

PA Bear [MS MVP]

If you must make identical posts to multiple newsgroups, please cross-post
one (1) message to all of them. Thank you.

Multiposting vs Crossposting:
http://www.blakjak.demon.co.uk/mul_crss.htm

Dear,

I try to install IE 8 through WSUS on Windows XP SP2 clients, but without
success, is the error in the log file the cause? ERROR: Couldn't read
value: 'LIPPackage' from [Version] section in update.inf


00:00.000:
====================================================================

00:00.125: Started: 2009/09/10 (Y/M/D) 14:52:38.075 (local)

00:00.140: Time Format in this log: MM:ss.mmm
(minutes:seconds.milliseconds)

00:00.156: Command line: f:\8accc5038729beaaae0194\update\iesetup.exe
/wu-silent

00:00.187: INFO: Checking version for
f:\8accc5038729beaaae0194\update\iesetup.exe: 8.0.6001.18702

00:00.296: INFO: Acquired Package Installer Mutex

00:00.312: INFO: Operating System: Windows Workstation: 5.1.2600
(Service
Pack 2)

00:00.515: ERROR: Couldn't read value: 'LIPPackage' from [Version]
section
in update.inf

00:00.531: INFO: Checking Prerequisites

00:00.562: INFO: Checking version for C:\WINDOWS\system32\msctf.dll:
5.1.2600.2180

00:00.578: INFO: Prerequisites Satisfied: No

00:00.640: INFO: Checking version for C:\Program Files\Internet
Explorer\iexplore.exe: 7.0.6000.16876

00:00.671: INFO: C:\Program Files\Internet Explorer\iexplore.exe
version:
7.0.6000.16876

00:00.687: INFO: Checking if iexplore.exe's current version is between
8.0.6001.0...

00:00.718: INFO: ...and 8.1.0.0...

00:00.734: INFO: Maximum version on which to run IEAK branding is:
8.1.0.0...

00:00.750: INFO: iexplore.exe version check success. Install can
proceed.

00:00.781: INFO: Checking version for C:\Program Files\Internet
Explorer\iexplore.exe: 7.0.6000.16876

00:00.796: INFO: Checking version for C:\WINDOWS\system32\mshtml.dll:
7.0.6000.16890

00:00.828: INFO: Checking version for C:\WINDOWS\system32\wininet.dll:
7.0.6000.16876

00:00.906: INFO: EULA not shown in passive or quiet mode.

00:00.937: INFO: Skip directly to Options page.

00:01.000: INFO: |PreInstall >>> CPageProgress::DlgProc: Exiting
Phase PH_NONE

00:01.015: INFO: |PreInstall >>> CPageProgress::_ChangeState:
Original Phase: 0

00:01.031: INFO: |Initialize >>> CPageProgress::_UpdateDisplay:
Actual Phase: 1

00:01.062: INFO: |Initialize >>>
[BEGIN]------------------------------
Click to expand...

00:01.078: INFO: |Initialize >>> CPageProgress::_UpdateDisplay:
Actual Phase: 1

00:01.093: INFO: |Initialize >>> SKIP[FALSE]>>Looking for skip
clauses

00:01.125: INFO: |Initialize >>> SKIP[FALSE]>>Result: RUNNING
This
Phase

00:01.140: INFO: |Initialize >>> Calculating bytes needed to
install.

00:01.171: INFO: |Initialize >>> Diskspace Required: 151918308

00:01.187: INFO: |Initialize >>> Diskspace Available to user:
26173431808

00:01.265: INFO: WindowsUpdate>>CWindowsUpdateMgr::Initialize:
CoCreateInstance.CLSID_UpdateSession: HResult 0x00000000

00:01.296: INFO: WindowsUpdate>>CWindowsUpdateMgr::Initialize:
PutClientApplicationID: HResult 0x00000000

00:01.312: INFO: WindowsUpdate>>CWindowsUpdateMgr::Initialize:
CreateUpdateSearcher: HResult 0x00000000

00:01.343: INFO: WindowsUpdate>>CWindowsUpdateMgr::Initialize:
CreateUpdateDownloader: HResult 0x00000000

00:01.359: INFO: WindowsUpdate>>CWindowsUpdateMgr::Initialize:
CreateUpdateInstaller: HResult 0x00000000

00:01.375: INFO: WindowsUpdate>>WindowsUpdateMgr::Initialize: State
Change: SS_INITIALIZED.

00:01.406: INFO: |Initialize >>> CStateInitialize::OnInitialize:
Windows Update Manager Initialization Result: 0x00000000

00:01.421: INFO: |Initialize >>> CInstallationState::_ExitState:
Preparing to Leave State.

00:01.437: INFO: |Initialize >>> CInstallationState::_ExitState:
Setting Progress 100.

00:01.468: INFO: |Initialize >>>
CInstallationState::_SetProgress:
Post Set Progress Message Succeeded.

00:01.484: INFO: |Initialize >>> CInstallationState::_ExitState:
Posting Exit Phase Message.

00:01.500: INFO: |Initialize >>> CInstallationState::_ExitState:
Post Exit Phase Message Succeeded.

00:01.531: INFO: |Initialize >>> CPageProgress::DlgProc: Received
WM_PR_SETPROGRESS, 64, 0

00:01.546: INFO: |Initialize >>> CPageProgress::_UpdateDisplay:
Actual Phase: 1

00:01.578: INFO: |Initialize >>> CPageProgress::DlgProc: Received
WM_PR_EXITPHASE, 0, 0

00:01.593: INFO: |Initialize >>> CPageProgress::_UpdateDisplay:
Actual Phase: 1

00:01.609: INFO: |Initialize >>>
<[END]--------------------------------

00:01.625: INFO: |Initialize >>> CPageProgress::_ChangeState:
Original Phase: 1

00:01.656: INFO: |Uninstall Prev. >>>
[BEGIN]------------------------------
Click to expand...

00:01.671: INFO: |Uninstall Prev. >>> CPageProgress::_UpdateDisplay:
Actual Phase: 2

00:01.687: INFO: |Uninstall Prev. >>> SKIP[FALSE]>>Looking for skip
clauses

00:01.718: INFO: |Uninstall Prev. >>> SKIP[FALSE]>> Adding [FALSE]
Condition: !_psdStateData->GetIsInitSuccessful()

00:01.734: INFO: |Uninstall Prev. >>> SKIP[FALSE]>> Adding [TRUE ]
Condition: !g_pApp->GetState()->AreWeDoingUninstall()

00:01.750: INFO: |Uninstall Prev. >>> SKIP[TRUE ]>>Result: SKIPPING
This
Phase

00:01.781: INFO: |Uninstall Prev. >>> CInstallationState::_ExitState:
Preparing to Leave State.

00:01.796: INFO: |Uninstall Prev. >>> CInstallationState::_ExitState:
Setting Progress 100.

00:01.812: INFO: |Uninstall Prev. >>>
CInstallationState::_SetProgress:
Post Set Progress Message Succeeded.

00:01.843: INFO: |Uninstall Prev. >>> CInstallationState::_ExitState:
Posting Exit Phase Message.

00:01.859: INFO: |Uninstall Prev. >>> CInstallationState::_ExitState:
Post Exit Phase Message Succeeded.

00:01.875: INFO: |Uninstall Prev. >>> CPageProgress::DlgProc: Received
WM_PR_SETPROGRESS, 64, 0

00:01.906: INFO: |Uninstall Prev. >>> CPageProgress::_UpdateDisplay:
Actual Phase: 2

00:01.921: INFO: |Uninstall Prev. >>> CPageProgress::DlgProc: Received
WM_PR_EXITPHASE, 0, 0

00:01.937: INFO: |Uninstall Prev. >>> CPageProgress::_UpdateDisplay:
Actual Phase: 2

00:01.968: INFO: |Uninstall Prev. >>>
<[END]--------------------------------

00:01.984: INFO: |Uninstall Prev. >>> CPageProgress::_ChangeState:
Original Phase: 2

00:02.000: INFO: |WU Download >>>
[BEGIN]------------------------------
Click to expand...

00:06.609: INFO: |Inst. Post-Upd. >>>
[BEGIN]------------------------------
Click to expand...

00:06.625: INFO: |Inst. Post-Upd. >>> CPageProgress::_UpdateDisplay:
Actual Phase: 10

00:06.656: INFO: |Inst. Post-Upd. >>> SKIP[FALSE]>>Looking for skip
clauses

00:06.671: INFO: |Inst. Post-Upd. >>> SKIP[FALSE]>> Adding [FALSE]
Condition: !_psdStateData->GetIsInitSuccessful()

00:06.687: INFO: |Inst. Post-Upd. >>> SKIP[FALSE]>> Adding [FALSE]
Condition: !g_pApp->GetState()->GetOptShouldUpdate()

00:06.718: INFO: |Inst. Post-Upd. >>> SKIP[FALSE]>> Adding [TRUE ]
Condition: !g_pApp->GetState()->GetResultCouldInstallIE()

00:06.734: INFO: |Inst. Post-Upd. >>> SKIP[TRUE ]>> Adding [TRUE ]
Condition:
g_pApp->GetState()->GetResultPostIEUpdateState()!=WU_COULD_DOWNLOAD

00:06.750: INFO: |Inst. Post-Upd. >>> SKIP[TRUE ]>> Adding [FALSE]
Condition: g_pApp->GetState()->GetOptIEAKMode()==IEAK_BRANDING

00:06.781: INFO: |Inst. Post-Upd. >>> SKIP[TRUE ]>> Adding [FALSE]
Condition: g_pApp->GetState()->AreWeDoingUninstall()

00:06.796: INFO: |Inst. Post-Upd. >>> SKIP[TRUE ]>> Adding [TRUE ]
Condition: !g_pApp->GetState()->GetPrerequisiteSatisfied()

00:06.812: INFO: |Inst. Post-Upd. >>> SKIP[TRUE ]>>Result: SKIPPING
This
Phase

00:06.843: INFO: |Inst. Post-Upd. >>> CInstallationState::_ExitState:
Preparing to Leave State.

00:06.859: INFO: |Inst. Post-Upd. >>> CInstallationState::_ExitState:
Setting Progress 100.

00:06.875: INFO: |Inst. Post-Upd. >>>
CInstallationState::_SetProgress:
Post Set Progress Message Succeeded.

00:06.906: INFO: |Inst. Post-Upd. >>> CInstallationState::_ExitState:
Posting Exit Phase Message.

00:06.921: INFO: |Inst. Post-Upd. >>> CInstallationState::_ExitState:
Post Exit Phase Message Succeeded.

00:06.937: INFO: |Inst. Post-Upd. >>> CPageProgress::DlgProc: Received
WM_PR_SETPROGRESS, 64, 0

00:06.968: INFO: |Inst. Post-Upd. >>> CPageProgress::_UpdateDisplay:
Actual Phase: 10

00:06.984: INFO: |Inst. Post-Upd. >>> CPageProgress::DlgProc: Received
WM_PR_EXITPHASE, 0, 0

00:07.000: INFO: Setting Windows Update Registry Keys:
LookingForUpdates=0x00 - ForcePostUpdateDownload=0x00 -
ForcePostUpdateInstall=0x00

00:07.031: INFO: |Inst. Post-Upd. >>> CPageProgress::_UpdateDisplay:
Actual Phase: 10

00:07.046: INFO: |Inst. Post-Upd. >>>
<[END]--------------------------------

00:07.062: INFO: |Inst. Post-Upd. >>> CPageProgress::_ChangeState:
Original Phase: 10

00:07.093: INFO: |IEAK After IEUPD >>>
[BEGIN]------------------------------
Click to expand...

00:07.109: INFO: |IEAK After IEUPD >>> CPageProgress::_UpdateDisplay:
Actual Phase: 11

00:07.125: INFO: |IEAK After IEUPD >>> SKIP[FALSE]>>Looking for skip
clauses

00:07.156: INFO: |IEAK After IEUPD >>> SKIP[FALSE]>> Adding [FALSE]
Condition: !_psdStateData->GetIsInitSuccessful()

00:07.171: INFO: |IEAK After IEUPD >>> SKIP[FALSE]>> Adding [TRUE ]
Condition: g_pApp->GetState()->GetOptIEAKMode()!=IEAK_PACKAGE

00:07.187: INFO: |IEAK After IEUPD >>> SKIP[TRUE ]>> Adding [FALSE]
Condition: g_pApp->GetState()->AreWeDoingUninstall()

00:07.218: INFO: |IEAK After IEUPD >>> SKIP[TRUE ]>> Adding [TRUE ]
Condition: !g_pApp->GetState()->GetPrerequisiteSatisfied()

00:07.312: INFO: |IEAK After IEUPD >>> SKIP[TRUE ]>>Result: SKIPPING
This
Phase

00:07.328: INFO: |IEAK After IEUPD >>> CInstallationState::_ExitState:
Preparing to Leave State.

00:07.359: INFO: |IEAK After IEUPD >>> CInstallationState::_ExitState:
Setting Progress 100.

00:07.375: INFO: |IEAK After IEUPD >>>
CInstallationState::_SetProgress:
Post Set Progress Message Succeeded.

00:07.406: INFO: |IEAK After IEUPD >>> CInstallationState::_ExitState:
Posting Exit Phase Message.

00:07.421: INFO: |IEAK After IEUPD >>> CInstallationState::_ExitState:
Post Exit Phase Message Succeeded.

00:07.437: INFO: |IEAK After IEUPD >>> CPageProgress::DlgProc: Received
WM_PR_SETPROGRESS, 64, 0

00:07.453: INFO: |IEAK After IEUPD >>> CPageProgress::_UpdateDisplay:
Actual Phase: 11

00:07.484: INFO: |IEAK After IEUPD >>> CPageProgress::DlgProc: Received
WM_PR_EXITPHASE, 0, 0

00:07.500: INFO: |IEAK After IEUPD >>> CPageProgress::_UpdateDisplay:
Actual Phase: 11

00:07.531: INFO: |IEAK After IEUPD >>>
<[END]--------------------------------

00:07.562: INFO: |IEAK After IEUPD >>> CPageProgress::_ChangeState:
Original Phase: 11

00:07.609: INFO: |IEAK Finalize >>>
[BEGIN]------------------------------
Click to expand...

00:07.625: INFO: |IEAK Finalize >>> CPageProgress::_UpdateDisplay:
Actual Phase: 12

00:07.640: INFO: |IEAK Finalize >>> SKIP[FALSE]>>Looking for skip
clauses

00:07.671: INFO: |IEAK Finalize >>> SKIP[FALSE]>> Adding [FALSE]
Condition: !_psdStateData->GetIsInitSuccessful()

00:07.687: INFO: |IEAK Finalize >>> SKIP[FALSE]>> Adding [TRUE ]
Condition: g_pApp->GetState()->GetOptIEAKMode()==IEAK_NONE

00:07.703: INFO: |IEAK Finalize >>> SKIP[TRUE ]>> Adding [FALSE]
Condition: g_pApp->GetState()->AreWeDoingUninstall()

00:07.734: INFO: |IEAK Finalize >>> SKIP[TRUE ]>> Adding [TRUE ]
Condition: !g_pApp->GetState()->GetPrerequisiteSatisfied()

00:07.750: INFO: |IEAK Finalize >>> SKIP[TRUE ]>>Result: SKIPPING
This
Phase

00:07.765: INFO: |IEAK Finalize >>> CInstallationState::_ExitState:
Preparing to Leave State.

00:07.796: INFO: |IEAK Finalize >>> CInstallationState::_ExitState:
Setting Progress 100.

00:07.812: INFO: |IEAK Finalize >>>
CInstallationState::_SetProgress:
Post Set Progress Message Succeeded.

00:07.828: INFO: |IEAK Finalize >>> CInstallationState::_ExitState:
Posting Exit Phase Message.

00:07.859: INFO: |IEAK Finalize >>> CInstallationState::_ExitState:
Post Exit Phase Message Succeeded.

00:07.875: INFO: |IEAK Finalize >>> CPageProgress::DlgProc: Received
WM_PR_SETPROGRESS, 64, 0

00:07.890: INFO: |IEAK Finalize >>> CPageProgress::_UpdateDisplay:
Actual Phase: 12

00:07.921: INFO: |IEAK Finalize >>> CPageProgress::DlgProc: Received
WM_PR_EXITPHASE, 0, 0

00:07.937: INFO: |IEAK Finalize >>> CPageProgress::_UpdateDisplay:
Actual Phase: 12

00:07.953: INFO: |IEAK Finalize >>>
<[END]--------------------------------

00:07.984: INFO: |IEAK Finalize >>> CPageProgress::_ChangeState:
Original Phase: 12

00:08.000: INFO: |Finalize >>>
[BEGIN]------------------------------
Click to expand...

00:08.015: INFO: |Finalize >>> CPageProgress::_UpdateDisplay:
Actual Phase: 13

00:08.046: INFO: |Finalize >>> SKIP[FALSE]>>Looking for skip
clauses

00:08.062: INFO: |Finalize >>> SKIP[FALSE]>>Result: RUNNING
This
Phase

00:08.078: INFO: |Finalize >>> CInstallationState::_ExitState:
Preparing to Leave State.

00:08.109: INFO: |Finalize >>> CInstallationState::_ExitState:
Setting Progress 100.

00:08.125: INFO: |Finalize >>>
CInstallationState::_SetProgress:
Post Set Progress Message Succeeded.

00:08.140: INFO: |Finalize >>> CInstallationState::_ExitState:
Posting Exit Phase Message.

00:08.171: INFO: |Finalize >>> CInstallationState::_ExitState:
Post Exit Phase Message Succeeded.

00:08.187: INFO: |Finalize >>> CPageProgress::DlgProc: Received
WM_PR_SETPROGRESS, 64, 0

00:08.203: INFO: |Finalize >>> CPageProgress::_UpdateDisplay:
Actual Phase: 13

00:08.296: INFO: |Finalize >>> CPageProgress::DlgProc: Received
WM_PR_EXITPHASE, 0, 0

00:08.328: INFO: |Finalize >>> CPageProgress::_UpdateDisplay:
Actual Phase: 13

00:08.343: INFO: |Finalize >>>
<[END]--------------------------------

00:08.359: INFO: |Finalize >>> CPageProgress::_ChangeState:
Original Phase: 13

00:11.046: INFO: REBOOT: not needed.

00:11.062: INFO: REBOOT: not needed.

00:11.093: INFO: Installer return value: hr=0x00000000

00:11.125: INFO: Setup exit code: 0x00000000.
Click to expand...
 
Top