Problem writing CD / DVD's ? ATAPI iHAS124 B

[Keith (Southend)G]

Does this log mean anything to anyone?

I installed this new DVD/CD RW , SATA, which plays and reads fine, but
when I come to write a CD it seems to drop out during the 'lead out'
part. Also seems to fail with 10x speed (1,500Kb), if that mean
anything.

Sorry to post such a long log, but I've run out of ideas.

Alternatively, could you point me to the correct group, if this one is
wrong?

Thanks

Keith (Southend)


<snip>

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 9.4.17.100
Internal Version: 9, 4, 17, 100
(Nero Express)
Recorder: <ATAPI iHAS124 B> Version: AL0F - HA 1
TA 0 - 9.4.17.100
Adapter driver: <IDE> HA 1
Drive buffer : 1536kB
Bus Type : via Inquiry data
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <ATAPI iHAS124 B >Version: AL0F - HA 1
TA 0 - 9.4.17.100
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3160023A nvatabus Port 0
ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120P0 nvatabus Port 0
ID 1 DMA: Off
DiskPeripheral : Hitachi HDT725025VLA380 nvatabus Port 1
ID 0 DMA: Off
CdRomPeripheral : ATAPI iHAS124 B nvatabus Port 2
ID 0 DMA: Off

=== CDRom-Device-Map ===
ATAPI iHAS124 B D: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 389MB (398748kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.2.2011
CD-ROM (ISO)
13:27:14 #1 Text 0 File SCSIPTICommands.cpp, Line 430
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

13:27:14 #2 Text 0 File Isodoc.cpp, Line 6998
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

13:27:14 #3 Text 0 File Burncd.cpp, Line 3242
ATAPI iHAS124 B
Seamless Link activated

13:27:14 #4 ISO9660GEN -11 File Geniso.cpp, Line 3327
First writeable address = 0 (0x00000000)

13:27:14 #5 ISO9660GEN -11 File Geniso.cpp, Line 3327
First writeable address = 20925 (0x000051BD)

13:27:14 #6 Text 0 File ThreadedTransferInterface.cpp, Line 1012
Removed 2 run-out blocks from end of track 0. Length: 600 -> 598.

13:27:14 #7 Text 0 File Burncd.cpp, Line 3572
Turn on Track-At-Once, using CD-R/RW media

13:27:14 #8 Text 0 File ThreadedTransferInterface.cpp, Line 1012
Removed 2 run-out blocks from end of track 2. Length: 600 -> 598.

13:27:14 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1012
Removed 2 run-out blocks from end of track 2. Length: 600 -> 598.

13:27:19 #10 SPTI -1128 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
CDB Data: 0x28 00 00 00 01 00 00 00 10 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 11 05
Buffer x06dfc340: Len x8000

13:27:19 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1012
Removed 2 run-out blocks from end of track 2. Length: 600 -> 598.

13:27:24 #12 Text 0 File DlgWaitCD.cpp, Line 294
Medium type in the drive: Unknown
Lowest/Highest CLV write speed: 4954606x/1284312x
Recorder min/max supported write speed: 1284096x/238x

13:27:24 #13 Text 0 File DlgWaitCD.cpp, Line 313
Last possible write address on media: 359846
Last address to be written: 21524

13:27:24 #14 Text 0 File DlgWaitCD.cpp, Line 325
Write in overburning mode: NO (enabled: CD)

13:27:24 #15 Text 0 File DlgWaitCD.cpp, Line 2843
Recorder: ATAPI iHAS124 B;
CD type reading failed
ATIP Data: ?

13:27:24 #16 Text 0 File DlgWaitCD.cpp, Line 500=========================================
Insert the disc to write to.
(Medium in drive: CD-RW. Medium required by compilation: CD-R/RW.)

13:27:24 #17 Text 0 File ThreadedTransferInterface.cpp, Line 739
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 600 (600) = #600/0:8.0
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
598 blocks [D: ATAPI iHAS124 B]
--------------------------------------------------------------

13:27:39 #18 Text 0 File ThreadedTransferInterface.cpp, Line 941
Prepare [D: ATAPI iHAS124 B] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 2 to 2: Idx 0 Idx
1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0
307200 1536000, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|
_RecDep__________
20775 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
20775 | 2 | 0 | 0x41 | 0 | 0 | 0x00
20925 | 2 | 1 | 0x41 | 600 | 20925 | 0x00
21525 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

13:27:39 #19 Text 0 File ThreadedTransferInterface.cpp, Line 1012
Removed 2 run-out blocks from end of track 2. Length: 600 -> 598.

13:27:43 #20 Text 0 File SCSIPTICommands.cpp, Line 217
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

13:27:43 #21 Text 0 File Burncd.cpp, Line 4279
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

13:27:43 #22 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

13:27:43 #23 Text 0 File Burncd.cpp, Line 4401
Cache writing successful.

13:27:43 #24 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

13:27:43 #25 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 10x (1,500 KB/s)

13:27:44 #26 Text 0 File ThreadedTransferInterface.cpp, Line 2695
Verifying disc position of item 0 (relocatable, disc pos, no patch
infos, orig at #0): write at #20925

13:27:44 #27 Text 0 File MMC.cpp, Line 21714
Set BUFE: Seamless Link -> ON , Adapt writespeed to disc : ON

13:27:44 #28 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800

13:27:44 #29 SPTI -1024 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1024)
CDB Data: 0x2A 00 00 00 51 BD 00 00 20 00 00 00
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x08
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 08 08
Buffer x09ce0040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

13:27:44 #30 CDR -1024 File Writer.cpp, Line 306
Communication failure
D: ATAPI iHAS124 B

13:27:48 #31 CDR -201 File WriterStatus.cpp, Line 325
Invalid write state
D: ATAPI iHAS124 B

13:27:48 #32 TRANSFER -18 File WriterStatus.cpp, Line 325
Could not perform EndTrack

13:27:48 #33 Text 0 File MMC.cpp, Line 17135
<ATAPI iHAS124 B > start Close Track #3

13:27:50 #34 SPTI -1169 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x07
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 07 00 80 21 08
Buffer x00380d40: Len x20

13:28:08 #35 Text 0 File DVDPlusDualLayer.cpp, Line 1452
SetDriveCaps: Set LAST LBA of layer 1 to 0

13:28:08 #36 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 10x (1,500 KB/s)

13:28:08 #37 Text 0 File SCSIPTICommands.cpp, Line 267
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

13:28:14 #38 Text 0 File Cdrdrv.cpp, Line 11478
DriveLocker: UnLockVolume completed

13:28:14 #39 Text 0 File SCSIPTICommands.cpp, Line 430
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
\AllocateCDROMs : 0 (Security Option)

<snip>

 

[Benedict]

Does this log mean anything to anyone?

I installed this new DVD/CD RW , SATA, which plays and reads fine, but
when I come to write a CD it seems to drop out during the 'lead out'
part. Also seems to fail with 10x speed (1,500Kb), if that mean
anything.

Sorry to post such a long log, but I've run out of ideas.

Alternatively, could you point me to the correct group, if this one is
wrong?

Thanks

Keith (Southend)


<snip>

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 9.4.17.100
Internal Version: 9, 4, 17, 100
(Nero Express)
Recorder: <ATAPI iHAS124 B> Version: AL0F - HA 1

ALOF is an old firmware so you should go to liteon and download smartpack
which will check for a newer firmware (ALOL) and install it. Its pretty
painless and should help with media compatibility.

 

[Keith (Southend)G]

ALOF is an old firmware so you should go to liteon and download smartpack
which will check for a newer firmware (ALOL) and install it. Its pretty
painless and should help with media compatibility.

Hi Benedict,

Ran that, seemed fine and found an update, re-booted, then after
windows came back up got a BSoD, which re-booted and seem to be back
were I was with the usual windows error reporting message.

Still not able to write, same problem.

Thanks

Keith (Southend)

 

[Benedict]

Hi Benedict,

Ran that, seemed fine and found an update, re-booted, then after
windows came back up got a BSoD, which re-booted and seem to be back
were I was with the usual windows error reporting message.

Still not able to write, same problem.

Thanks

Keith (Southend)

Looking at the log it looks like your mobo isnt configured right. All drives
have DMA Off which isnt right and the ATA controller is in IDE mode whereas
a current motherboard should run in AHCI mode - IDE mode will run slower. So
I would set motherboard bios to optimal defaults and make sure mobo drivers
are installed.

 

[Keith (Southend)G]

Looking at the log it looks like your mobo isnt configured right. All drives
have DMA Off which isnt right and the ATA controller is in IDE mode whereas
a current motherboard should run in AHCI mode - IDE mode will run slower.So
I would set motherboard bios to optimal defaults and make sure mobo drivers
are installed.

Hi Benedict, that's interesting you say that. Upto a week ago I had
given up on this computer as it wouldn't boot up. The BIOS was
stopping it booting up before even the setup screen. I jumpered the
BIOS and after a couple of goes got it going. It's rebooted ok the
last week now. The boot order was screwed up and of cause I had to
change the date (default 2006). However, I had an old CD RW and DVD RW
that had had it, so I took them out and replaced with this new one,
which of course is SATA. I have 3 hard drives, the main SATA and two
slave IDE's, running XP.

I built this myself in 2005:
Abit AN8 MoBo
1 Gig RAM OCZ

I reckon you may have hit the nail on the head with some of the
problems, but I'm not really sure what needs changing and how?

Appreciate your observations, thanks.

Keith (Southend)

 

[Benedict]

In the Bios go to "Standard CMOS Features" and use F7 for Optimal defaults
NOT F6 for fail-safe defaults.
Select any of the IDE channels and press 'enter' and you should see the
Access mode set to 'Auto' which will by default allow DMA.

Also important with nvidia chipset mobo's is that (when installing the OS)
you install the motherboard drivers before graphics and sound drivers -
never leave it up Windows' default drivers.