System Crashing!!!!!

[Guest]

Pc keeps shutting down randomly but it does not go the the normal shut down
procedure, instead it just crashes like someone switches off the power or
something.

sometimes aftter 10 min of booting sometimes 2 hrs later

I get the Error report dialog the next time i reboot after the crash

BCCode : 10000050 BCP1 : E16A1000 BCP2 : 00000000 BCP3 : 804FAFF5
BCP4 : 00000001 OSVer : 5_1_2600 SP : 2_0 Product : 256_1

Data report etc....

C:\DOCUME~1\Mn\LOCALS~1\Temp\WER2386.dir00\Mini020407-01.dmp
C:\DOCUME~1\Mn\LOCALS~1\Temp\WER2386.dir00\sysdata.xml

What could be the problem and whats the solution??

 

[Bill Ridgeway]

Sounds as though the processor may be overheating. Check the processor fan.
If it's going slowly, making a noise or not going at all change the fan. If
the processor is already well cooked you'll need to replace the processor as
well.

Regards.

Bill Ridgeway
Computer Solutions

 

[Guest]

I will check up that....

 

[philo]

I will check up that....

If the CPU temp is OK
run a RAM test next

 

[Guest]

How do u do the test???

If the CPU temp is OK
run a RAM test next

 

[Smoker]

Pc keeps shutting down randomly but it does not go the the normal shut
down
procedure, instead it just crashes like someone switches off the power or
something.

sometimes aftter 10 min of booting sometimes 2 hrs later

I get the Error report dialog the next time i reboot after the crash

BCCode : 10000050 BCP1 : E16A1000 BCP2 : 00000000 BCP3 : 804FAFF5
BCP4 : 00000001 OSVer : 5_1_2600 SP : 2_0 Product : 256_1

Data report etc....

C:\DOCUME~1\Mn\LOCALS~1\Temp\WER2386.dir00\Mini020407-01.dmp
C:\DOCUME~1\Mn\LOCALS~1\Temp\WER2386.dir00\sysdata.xml

What could be the problem and whats the solution??

 

[Guest]

http://mywebpages.comcast.net/SupportCD/DiagnoseXP.html
See step 7, (memtest86+) in the above link.. Step 8 maybe, your call..
May also just need to replace the CMOS battery, just replace it, can get one
at Radio Shack, etc..
http://www.google.com/search?q=How+to+replace+a+CMOS+battery
Might also be the PSU going bad too..
http://wiki.ehow.com/Diagnose-and-Replace-a-Failed-PC-Power-Supply
Hope this can help..
Cheers
j;-j

 

[Ron Martell]

Pc keeps shutting down randomly but it does not go the the normal shut down
procedure, instead it just crashes like someone switches off the power or
something.

sometimes aftter 10 min of booting sometimes 2 hrs later

I get the Error report dialog the next time i reboot after the crash

BCCode : 10000050 BCP1 : E16A1000 BCP2 : 00000000 BCP3 : 804FAFF5
BCP4 : 00000001 OSVer : 5_1_2600 SP : 2_0 Product : 256_1

Data report etc....

C:\DOCUME~1\Mn\LOCALS~1\Temp\WER2386.dir00\Mini020407-01.dmp
C:\DOCUME~1\Mn\LOCALS~1\Temp\WER2386.dir00\sysdata.xml

What could be the problem and whats the solution??

Your error is called PAGE_FAULT_IN_NONPAGED_AREA

In your case it is originating with whatever device driver or
component that is using memory address 804FAFF5

There are ways of tracing this item but it is a bit convoluted. Try
the memory tests first - defective RAM is a prime suspect for this
error code. If your system passes the memory tests with no errors
then post a response back here and I will give you the instructions
for tracing the origin.

Good luck

Ron Martell Duncan B.C. Canada
--
Microsoft MVP (1997 - 2006)
On-Line Help Computer Service
http://onlinehelp.bc.ca
Syberfix Remote Computer Repair

"Anyone who thinks that they are too small to make a difference
has never been in bed with a mosquito."

 

[Guest]

I changed the setting...

System Properties - Advanced - Startup and Recovery Settings and unchecked
"Automatically Restart".

The next time i got the same problem a blue screen appeared and its contents
are::


A problem has been detected and windows has been shut

down to prevent damage to your computer.
Page_fault_in_nonpaged_area
If this is the first time you'veseen this stop error

screen restart your computer. If this screen appers

again, follow these steps:
Check to make sure any new hardware or software is

properly installed. If this is a new installation ask

your hardware or software manufacturer for any windows

updates you might need. If problems continue, disable or

remove any newly installed hardware or software. Disable

BIOS memory options such as caching or shadowing. If you

need to use safe mode to remove or disable components,

restart your computer, press F8 to select advanced start

up options, and then select safe mode.
Technical information:
***STOP:0x00000050(xE2BDC000, 0X00000000, 0X804FAFF5,

0X00000001)

Begining dump of physical memory physical memory dump

complete.
Contact your system administrator or technical support

group for further assistence.

 

[Guest]

Another time i got....




A problem has been detected and windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: WINCOM32.sys
Driver_unloaded_without_cancelling_pending_operations

If this is the first time you'veseen this stop error screen restart your
computer. If this screen appers again, follow these steps:
Check to make sure any new hardware or software is properly installed. If
this is a new installation ask your hardware or software manufacturer for any
windows updates you might need. If problems continue, disable or remove any
newly installed hardware or software. Disable BIOS memory options such as
caching or shadowing. If you need to use safe mode to remove or disable
components, restart your computer, press F8 to select advanced start up
options, and then select safe mode.
Technical information:
***STOP:0x000000CE (0xF2964576, 0X00000000, 0XF2964576, 0X00000000)
Wincom32.sys

Begining dump of physical memory physical memory dump complete.
Contact your system administrator or technical support group for further
assistence.

 

[RalfG]

WINCOM32.SYS is apparently a trojan. Also known as the Snow worm. If your
own antivirus program can't detect and remove it use one of the free online
scanners to do so.

http://www.pandasoftware.es/com/ca/ ---look for Activescan link

http://housecall.trendmicro.com/

http://us.mcafee.com/root/mfs/default.asp?pkgid=0


http://security.symantec.com/sscv6/default.asp?productid=symhome&langid=ie&venid=sym

 

[Guest]

http://www.symantec.com/security_response/writeup.jsp?docid=2007-011917-1403-99&tabid=2
May also be associated with a new strain, see link for details..
Cheers
j;-j

 

[Guest]

I have formatted the system as a last resort..