Strange Hard Disk Behaviour

[Gaurav]

I'm using Seagate SATA hard drive. I moved it to another PC (running on
Samsung SATA hard drive) with Seagate drive being secondary. But windows of
other computer won't recognize it. It is being recognized in BIOS. When I try
to boot the Seagate drive as primary, the PC reboots after Windows bootup
screen shows up. I tried to format it using Windows XP cd. The CD is able to
recognize the hard disk but shows the partitions as raw and is unable to
delete or format the partition. It is also not working on the original PC on
which it earlier used to.

I also tried to boot my PC through DR-DOS, where I am able to see all my
directories and files but not able to copy them to any other drive.

There is no noise in the hard disk and it seems to run smoothly.

Please guide how to recover my files or if my hard disk can be repaired.

 

[nass]

I'm using Seagate SATA hard drive. I moved it to another PC (running on
Samsung SATA hard drive) with Seagate drive being secondary. But windows of
other computer won't recognize it. It is being recognized in BIOS. When I try
to boot the Seagate drive as primary, the PC reboots after Windows bootup
screen shows up. I tried to format it using Windows XP cd. The CD is able to
recognize the hard disk but shows the partitions as raw and is unable to
delete or format the partition. It is also not working on the original PC on
which it earlier used to.

I also tried to boot my PC through DR-DOS, where I am able to see all my
directories and files but not able to copy them to any other drive.

There is no noise in the hard disk and it seems to run smoothly.

Please guide how to recover my files or if my hard disk can be repaired.

Did you set the jumpers to slave on the secondary SATA HDD?.
Normally there is a diagram explain how to set the Jumper on the HDD try
that and Reboot, how do you connect the SATA HDD, is it through a IDE or USB?.
HTH.
nass

 

[Ghostrider]

:




Did you set the jumpers to slave on the secondary SATA HDD?.
Normally there is a diagram explain how to set the Jumper on the HDD try
that and Reboot, how do you connect the SATA HDD, is it through a IDE or USB?.
HTH.
nass

There are no jumpers to set for Master/Slave on a SATA drive. However,
some motherboard manufacturers may designate and identify SATA ports as
such. What may be more significant is whether or not the Seagate drive
might need to be jumpered to match the SATA speed of the other motherboard.

 

[Twayne]

I'm using Seagate SATA hard drive. I moved it to another PC (running

on Samsung SATA hard drive) with Seagate drive being secondary. But
windows of other computer won't recognize it. It is being recognized
in BIOS. When I try to boot the Seagate drive as primary, the PC
reboots after Windows bootup screen shows up. I tried to format it
using Windows XP cd. The CD is able to recognize the hard disk but
shows the partitions as raw and is unable to delete or format the
partition. It is also not working on the original PC on which it
earlier used to.

I also tried to boot my PC through DR-DOS, where I am able to see all
my directories and files but not able to copy them to any other drive.

There is no noise in the hard disk and it seems to run smoothly.

Please guide how to recover my files or if my hard disk can be
repaired.

1. SATA drives do NOT have a master/slave relationship OR jumper
setting!
2. If your SATA drive has jumper/s, RTFM to see what they're for. They
are NOT for setting master/slave; no such thing with SATA drives! Every
SATA drive is a MASTER!!
3, Are you certain it's a SATA drive? If so, it will have a much
smaller data cable than an IDE drive with its 80 pin ribbon cable.
Maybe you mean PATA? That's actually an IDE drive. SATA drives are NOT
IDE drives!

Wikipedia has an excellent article that may help you a LOT. Search for
SATA
--

Regards,

Twayne

OO0 is a GREAT MS Office replacement
www.openoffice.org

Please respond to the newsgroup, not to
my e-mail, so that all may benefit. I do not
always respond to newsgroup e-mails.