STOP 0x000000D3

M

Mike

Hi,

My Windows 2000 SP4 server won't boot. Screen goes blank during 2000
loading splash screen.

Safe mode gives me STOP error 0x000000D3
The driver mistakenly marked a part of it's image pageable instead of
non-pageable.
This driver may be at fault: dmio.sys

I ran a chkdsk /r from recovery console and it found and fixed errors. I
then ran it again and it found no errors. No resolution.

I then replaced the original dmio.sys with a copy from backup and also from
a similar server and that didn't resolve the issue.

I was now going to do a windows repair, but decided to see first if there
was something less risky first. Any suggestions?


Thanks!
 
M

Mike

Problem solved. Called MS Support and they found an issue with similar Dell
servers. The fix was to disable the dmio drive in recovery console by
typing lissvc to list services, then type disable dmio. System then booted
fine.

Thanks!
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top