Setup CanNot Continue

R

Rebecca Xie

I changed the virtual memory(page file) from 192MB to the
recommended size 381MB (max. is 384MB) due to low virtual
memory and then couldn't start my pc. I used the
bootable floppy disks and windows2000 Cd to start and
repair. I got the following msg on the Windows 2000
Professional Setup window:

The following value in the .SIF file used by Setup is
corrupted or missing:
Value 0 on the line in section [SourceDiskFiles] with
key "SP:1.cab".
Setup cannot continue.

Please help!

Thanks,
Rebecca
 
G

Guest

I've had this happen before, its your memory stick. Its
duff. change the memory module / dimm / simm whatever
you have and try again. I had a pc that worked fine but
windows would not install using it and worked fine
afterwards - turns out that a single sector type thing
had a fault and that was that.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

How to change Virtual Memory back to initial size 3
Setup cannot continue. The value in the .SIF file is corrupt or missing 1
Error message on XP setup on new HDD 3
Windows 2000 SP4 integrated is failing during setup 6
Setup Win2K on new hard drive 1
>.SIF missing or corrpted 1
Value in .SIF file 1
.SIF file error while installing the XP Rro 1

Top