Check Disk runs on every boot
Autochk.exe is a version of Chkdsk that runs only before Windows XP
Professional starts. Autochk runs in the following situations:
Autochk runs if you try to run Chkdsk on the boot volume.
Autochk runs if Chkdsk cannot gain exclusive use of the volume.
Autochk runs if the volume is flagged as dirty.
This can happen if the drive's dirty bit is set.
When a drive's dirty bit is set, autochk automatically checks the volume for
errors the next time the computer is restarted.
Start | Run | Type: cmd | OK |
Type: fsutil dirty query C:
Hit ENTER
This will report whether the dirty bit is set.
Volume C: is not dirty
Volume C: is dirty
[[If a volume's dirty bit is set, this indicates that the file system may be
in an inconsistent state. The dirty bit can be set because the volume is
online and has outstanding changes, because changes were made to the volume
and the computer shutdown before the changes were committed to disk, or
because corruption was detected on the volume. If the dirty bit is set when
the computer restarts, chkdsk runs to verify the consistency of the volume.
Every time Windows XP starts, Autochk.exe is called by the Kernel to scan
all volumes to check if the volume dirty bit is set. If the dirty bit is
set, autochk performs an immediate chkdsk /f on that volume. Chkdsk /f
verifies file system integrity and attempts to fix any problems with the
volume.]]
==========
If this is not the problem.....
Go here:
http://www.kellys-korner-xp.com/xp_tweaks.htm
Read the instructions at the top of the page.
Scroll down to:
82. Disable or Enable Check Disk Upon Boot
Click on Disable.
