SATA300

A

audra

I bought a Maxtor SATA300 500 Gig Hard Drive. I put it in my computer and it
showed up in my BIOS. This disk that came with it won't boot so I'm not sure
how to get this drive going. Anyone can help?
 
B

Bob Eyster

Dis-connect the old HDD that won't boot, connect the new drive, place the OS
CD that you plan to install into your CD ROM---make sure you pc is set to
boot from you cd ROM---turn on you computer hit any key when prompt to boot
from your CD and follow instructions
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Which CPU to upgrade to? 8
Newbie:Which hard drive is compatible? 5
Vista freezing and random usless DVD drive appearing? 6
Partitioned Hard Drive, Want to use Restore Disks 2
I got a good one here 3
SATA-300 adapter card for ASUS P4PE. Promise SATA300 TX4? 10
Panasonic cf-29 boot from CD 0
Problem adding new SATA Controller 3

Top