samsung lcd problem

B

BSK

I am trying to hook up a samsung sycmaster 710N to my laptop for
extended desktop. It worked at first and then i suddenly got the
error message 'Not Optimum Mode Recommended Mode: 1280x1024 60Hz' Of
course, i changed the settings to match those but to no avail. Any
ideas on what i can do or can i turn of this warning and operate in a
not optimum mode? Any help would be great.
 
R

RalfG

The resolution settings are in both the monitor and Windows display
properties. If you run a program that changes the resolution in Windows (eg.
games can do this) you will get the resolution error again. Usually you can
turn off the warning message in the monitor's setup options (not Windows).
 
R

Ron Badour

Using google.com, I found another user reporting the same error message and
his monitor had the same problem on two different computers. If your
monitor acts up on another PC, suspect hardware and you might want to check
with Samsung.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Monitor problem after windows update 5
Not Optimum Mode 1280x1024 60Hz 13
Resolution Continuously Resets 5
A mini review of Iphone 12 mini 4
samsung 213t lcd monitor 2
LCD problem 1
Monitor Resolution Problem 4
Ground loop isolator causes loss of audio signal 9

Top