K
Ken
I have a Core 2 Duo Desktop PC that is less than 1-year old with 4Gb RAM –
the OS is XP SP2 and current with all subsequent releases.
The following error message, headed RUNDLL:
an exception has occurred while trying to run
"c:\windows\system32\shell32.dll,control_rundll
"c:\windows\system32\sysdm.cpl" ,system",
is displayed when I attempt to display the “Open With†dialog box or click
the following buttons in the “System Properties†dialog on the “Advanced†tab
in the “Startup and Recovery†section: Settings, Environment Variables or
Error Reporting.
If the problem occurs with other functions, I haven’t found them yet.
I have had other unrelated issues resulting in the PC being rebuilt twice
from a hard disk format. The first rebuild was completed by the retailer with
their OEM XP SP2 installation disk. I rebuilt it the second time using the XP
SP2 disk that came with the PC.
On both occasions all subsequent OS releases were downloaded and installed.
The only piece of hardware that hasn’t been either been tested stupid or
replaced (again for other reasons) is the Motherboard. However, I have been
told that the error message in question is unlikely to be hardware related.
As the error has existed since the PC was new, I tested for it and found
that it existed after I rebuilt the PC. I tested this when Windows was the
only software on the PC, i.e. before anything else was installed, before any
peripherals or the Internet were connected.
I’ve tried searching the Internet and Microsoft for answers without success.
I’ve tried Windows “Repair†install without success.
I’ve tried copying “shell32.dll†and “sysdm.cpl from another PC with the
same build standard without success. I was told that this may not have worked
because if these files were already in the cache, the cache files may have
overwritten the newly introduced files as part of Windows self-protection
from changes to system files.
As this was a problem from the start of a fresh install, obviously using a
Restore Point isn’t an option.
The system logs do not report this error. The system logs are so clean you
could be forgiven for thinking that this is as good as it gets for XP.
The system is otherwise very stable. It runs 24/7 with typically only
needing a restart after software updates.
I use the Cisco firewall in the modem / router, NOD32 anti-virus, Online
Armour, Spybot and Ad-Aware. I have very good housekeeping utilities, most of
which are used at least weekly and I defrag at least once per month.
Sorry about the overload of information, but I’m attempting to save the time
of anybody that may be willing to help by eliminating what has already been
tried.
Thanks for your consideration.
Kindest regards
Ken
the OS is XP SP2 and current with all subsequent releases.
The following error message, headed RUNDLL:
an exception has occurred while trying to run
"c:\windows\system32\shell32.dll,control_rundll
"c:\windows\system32\sysdm.cpl" ,system",
is displayed when I attempt to display the “Open With†dialog box or click
the following buttons in the “System Properties†dialog on the “Advanced†tab
in the “Startup and Recovery†section: Settings, Environment Variables or
Error Reporting.
If the problem occurs with other functions, I haven’t found them yet.
I have had other unrelated issues resulting in the PC being rebuilt twice
from a hard disk format. The first rebuild was completed by the retailer with
their OEM XP SP2 installation disk. I rebuilt it the second time using the XP
SP2 disk that came with the PC.
On both occasions all subsequent OS releases were downloaded and installed.
The only piece of hardware that hasn’t been either been tested stupid or
replaced (again for other reasons) is the Motherboard. However, I have been
told that the error message in question is unlikely to be hardware related.
As the error has existed since the PC was new, I tested for it and found
that it existed after I rebuilt the PC. I tested this when Windows was the
only software on the PC, i.e. before anything else was installed, before any
peripherals or the Internet were connected.
I’ve tried searching the Internet and Microsoft for answers without success.
I’ve tried Windows “Repair†install without success.
I’ve tried copying “shell32.dll†and “sysdm.cpl from another PC with the
same build standard without success. I was told that this may not have worked
because if these files were already in the cache, the cache files may have
overwritten the newly introduced files as part of Windows self-protection
from changes to system files.
As this was a problem from the start of a fresh install, obviously using a
Restore Point isn’t an option.
The system logs do not report this error. The system logs are so clean you
could be forgiven for thinking that this is as good as it gets for XP.
The system is otherwise very stable. It runs 24/7 with typically only
needing a restart after software updates.
I use the Cisco firewall in the modem / router, NOD32 anti-virus, Online
Armour, Spybot and Ad-Aware. I have very good housekeeping utilities, most of
which are used at least weekly and I defrag at least once per month.
Sorry about the overload of information, but I’m attempting to save the time
of anybody that may be willing to help by eliminating what has already been
tried.
Thanks for your consideration.
Kindest regards
Ken