replace motherboard

[Cnews-ms]

My motherbord went out. I am going to replace but will my w2k server need
to be reloaded?? or are there any do' and dont's

regards


Craig
--

 

[Bruce Chambers]

Greetings --

Normally, unless the new motherboard is virtually identical to the
old one (same chipset, IDE controllers, etc), you'll most likely need
to perform a repair (a.k.a. in-place upgrade) installation, at the
very least (and don't forget to reinstall any service packs and
subsequent hot fixes):

How to Perform an In-Place Upgrade of Windows 2000
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q292175

What an In-Place Win2K Upgrade Changes and What It Doesn't
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q306952

If that fails:

How to Move a Windows 2000 Installation to Different Hardware
http://support.microsoft.com/default.aspx?scid=KB;EN-US;Q249694&ID=KB;EN-US;Q249694


Bruce Chambers
--
Help us help you:



You can have peace. Or you can have freedom. Don't ever count on
having both at once. - RAH