I don't know how much good this will do, but from a parallel install, run
regedt32.exe, then from the Local Machine Hive, choose Registry|Load Hive,
then navigate to the
%windir%\system32\config
directory on the other install, and find the system file, then Open, in the
Key Name box give it some temp name, then under tempname, navigate to
HKEY_LOCAL_MACHINE\SYSTEM\Select
and look in the Reg_Dword value of "Current", this is the current
controlset, then navigate to
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet00x\Control\CrashControl
Where x = the value of "Current" (found above) and set the values as follows
"AutoReboot"=dword:00000000
"CrashDumpEnabled"=dword:00000001
"LogEvent"=dword:00000001
"Overwrite"=dword:00000001
Then navigate back up to "tempname" and choose Unload Hive, and boot your
original install, Autoreboot is now turned off so you should be able to read
the stop error.
Bug Check Codes
http://msdn.microsoft.com/library/e..._f55acfed-3296-4e84-8885-c3162fd0ddbf.xml.asp
If nothing else you can at least recover your data from the parallel install
prior to rebuilding the operating system.
This article may also help you.
http://support.microsoft.com/default.aspx?scid=kb;en-us;266465
--
Regards,
Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect
:
| I'm running w2k and when it gets to the startup screen it reboots it self,
I
| hate to do a clean install, but not sure if's it my only option. can
anyone
| help with this.
| --
| Thank you
