Ram problem please help

  • Thread starter Thread starter Dale Rollands
  • Start date Start date
D

Dale Rollands

I have 3 256meg Ram chips , they all work, and I have 3 slots, which all
work, tested them all.
I had 512Meg and got another chip at 256Meg, I added it ...
BUT my computer only sees 512m of Ram , reguardless of what order I put
the Ram chips in..
Why can't my computer see the extra 256m of ram??
I am using windows XP home
Please help
thank you
 
If I were you I would read the manufacturer's motherboard
manual (it's probably on their web-site) regarding RAM on
your particular motherboard. There can be conditions on
the use of the third slot. It may only work with certain
size-combinations or sub-types of the RAM you have.

It's also possible that the motherboard is maxed out at
512Mb - it's not all that unusual, especially for an older
board.

Good Luck !
 
Dale Rollands said:
I have 3 256meg Ram chips , they all work, and I have 3 slots, which all
work, tested them all.
I had 512Meg and got another chip at 256Meg, I added it ...
BUT my computer only sees 512m of Ram , reguardless of what order I put
the Ram chips in..
Why can't my computer see the extra 256m of ram??
I am using windows XP home

Asked and answered in another newsgroup.


Ron Martell Duncan B.C. Canada
--
Microsoft MVP
On-Line Help Computer Service
http://onlinehelp.bc.ca

"The reason computer chips are so small is computers don't eat much."
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Memory problem help 4
Ram problem help please 6
Help please Memory problem 3
Ram install problemhelp 2
Memory help please 8
MUST I use TWO Memory Sticks? 19
memory upgrade 5
Incorrect Total RAM Reported 5

Back
Top