Question about a Modem Log file

G

Guest

Hi

I am trying to connect a Win2000professional system to an embedded sysem by
using a Communications cable between two computers (COM1)- PPP connection,
embedded systems only receives ATE1, nothing else.
Win2000 machine receives PPP packets(LCP configure), I could see on the
Pre_dial In window.
When I checked the modem logfile it says waiting for response also an error
message-WriteFile() Failure, Error=000003e3.

When embedded system receives this ATE, I have respond with
CLIENTSERVER
CLIENTSERVER
The above doesn't help

Any Suggestions..

Thanks
ahilan

logfile
11-11-2004 14:18:55.662 - File: C:\WINNT\system32\unimdm.tsp, Version
5.0.2195 - Retail
11-11-2004 14:18:55.662 - File: C:\WINNT\system32\unimdmat.dll, Version
5.0.2195 - Retail
11-11-2004 14:18:55.662 - File: C:\WINNT\system32\uniplat.dll, Version
5.0.2195 - Retail
11-11-2004 14:18:55.678 - File: C:\WINNT\system32\drivers\modem.sys, Version
5.0.2195 - Retail
11-11-2004 14:18:55.678 - File: C:\WINNT\system32\modemui.dll, Version
5.0.2195 - Retail
11-11-2004 14:18:55.678 - Modem type: Communications cable between two
computers
11-11-2004 14:18:55.678 - Modem inf path: mdmhayes.inf
11-11-2004 14:18:55.678 - Modem inf section: M2700
11-11-2004 14:18:55.678 - Opening Modem
11-11-2004 14:18:55.678 - 19200,8,N,1, ctsfl=1, rtsctl=2
11-11-2004 14:18:55.678 - Initializing modem.
11-11-2004 14:18:55.693 - Waiting for a call.
11-11-2004 14:18:55.693 - TSP(0000): Making call
11-11-2004 14:18:55.724 - 19200,8,N,1, ctsfl=0, rtsctl=1
11-11-2004 14:18:55.724 - Initializing modem.
11-11-2004 14:18:55.724 - Passthrough On
11-11-2004 14:18:55.724 - TSP: Displaying Terminal Dialog11-11-2004
14:20:35.760 - Passthrough Off
11-11-2004 14:20:35.760 - 19200,8,N,1, ctsfl=1, rtsctl=2
11-11-2004 14:20:35.760 - Initializing modem.
11-11-2004 14:20:35.760 - Dialing.
11-11-2004 14:20:35.760 - TSP(0000): LINEEVENT: LINECALLSTATE_DIALING
11-11-2004 14:20:35.760 - TSP(0000): LINEEVENT: LINECALLSTATE_PROCEEDING
11-11-2004 14:20:35.775 - Send: CLIENT
11-11-2004 14:20:37.775 - Timed out waiting for response from modem
11-11-2004 14:20:37.775 - Failed to send command because of WriteFile()
Failure, Error=000003e3.
11-11-2004 14:20:37.791 - Send: CLIENT
11-11-2004 14:20:39.791 - Timed out waiting for response from modem
11-11-2004 14:20:39.791 - Failed to send command because of WriteFile()
Failure, Error=000003e3.
11-11-2004 14:20:39.807 - Send: CLIENT
11-11-2004 14:20:41.807 - Timed out waiting for response from modem
11-11-2004 14:20:41.807 - Failed to send command because of WriteFile()
Failure, Error=000003e3.
11-11-2004 14:20:41.822 - Send: CLIENT
11-11-2004 14:20:43.822 - Timed out waiting for response from modem
11-11-2004 14:20:43.822 - Failed to send command because of WriteFile()
Failure, Error=000003e3.
11-11-2004 14:20:43.822 - Hanging up the modem.
11-11-2004 14:20:43.822 - Hardware hangup by lowering DTR.
11-11-2004 14:20:45.822 - 19200,8,N,1, ctsfl=1, rtsctl=2
11-11-2004 14:20:45.822 - Initializing modem.
11-11-2004 14:20:45.822 - Waiting for a call.
11-11-2004 14:20:45.822 - TSP(0000): LINEEVENT:
LINECALLSTATE_DISCONNECTED(0x4000)
11-11-2004 14:20:45.822 - TSP(0000): LINEEVENT: LINECALLSTATE_IDLE
11-11-2004 14:20:45.822 - TSP(0000): Dropping call
11-11-2004 14:20:45.822 - TSP(0000): Closing Call
11-11-2004 14:20:45.822 - Session Statistics:
11-11-2004 14:20:45.822 - Reads : 0 bytes
11-11-2004 14:20:45.822 - Writes: 0 bytes
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Connected but no access to network 3
Faxing a Word document using a fax modem via Microsoft Fax 10
Modem Nightmare 1
Modem Nightmare 3
NWN2 (error:Could not find any compatible Direct3D devices) 0
Age of Empires not running under XP 1
The attempt to send the fax failed. There was no answer. The service will at 2
Game doesn't work after MS update 8

Top