Programs Not responding After Service pack 3 install

X

XP User

Have several programs going into hangup. Have to end program and send report
to microsoft. Not sure what started this but I believe it's related to
Service pack 3. Started my help and support program and can't get it off at
all. It sends the report of terming but the program is stillin task manager
saying not responding. The real bad thing about this is my CPU usage is max
when this is ocurring and until all reports are sent and closed I can't do
much else or wait 3or 4 mins. for the program to end. any thoughts on this?
 
S

Shenan Stanley

XP said:
Have several programs going into hangup. Have to end program and
send report to microsoft. Not sure what started this but I believe
it's related to Service pack 3. Started my help and support program
and can't get it off at all. It sends the report of terming but the
program is stillin task manager saying not responding. The real bad
thing about this is my CPU usage is max when this is ocurring and
until all reports are sent and closed I can't do much else or wait
3or 4 mins. for the program to end. any thoughts on this?

Try to do the following...

Start button --> RUN
(no "RUN"? Press the "Windows Key" + R on your keyboard)
--> type in:
winver
--> Click OK.

The picture at the top of the window that opens will give you the general
(Operating System name and flavor) while the line starting with the word
"version" will give you the rest of the story.

Post _both_ in response to this message verbatim. ;-)

Then - start the cleanup.

Ignore the title and follow the sub-section under "Advanced Troubleshooting"
titled, "Method 1: Reset the registry and the file permissions"
http://support.microsoft.com/kb/949377
*will take time
(** Ignore the last step - you said you have SP3 installed.)

Reboot and ...

Download/install this:
http://support.microsoft.com/kb/290301

After installing, do the following:

Start button --> RUN --> type in:
"%ProgramFiles%\Windows Installer Clean Up\msizap.exe" g!
--> Click OK.
(The quotation marks and percentage signs and spacing should be exact.)

Download, install, run, update and perform a full scan (separately) with the
following two applications (freeware versions are the ones to use for this):

SuperAntiSpyware
http://www.superantispyware.com/
(Reboot if asked.)

MalwareBytes
http://www.malwarebytes.com/
(Reboot if asked.)

After performing a full scan with one and then the other and removing
whatever they both find completely, you may uninstall these products,
if you wish.

Download and run the MSRT manually:
http://www.microsoft.com/security/malwareremove/default.mspx

Reboot (whether asked to or not.)

Download/Install the latest Windows Installer (for your OS):
( Windows XP 32-bit : WindowsXP-KB942288-v3-x86.exe )
http://www.microsoft.com/downloadS/...6F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

Reboot.

and...

Download the latest version of the Windows Update agent from here (x86):
http://go.microsoft.com/fwlink/?LinkID=91237
.... and save it to the root of your C:\ drive. After saving it to the root
of the C:\ drive, do the following:

Close all Internet Explorer windows and other applications.

Start button --> RUN and type in:
%SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
--> Click OK.

(If asked, select "Run.) --> Click on NEXT --> Select "I agree" and click on
NEXT --> When it finishes installing, click on "Finish"...

Reboot.

Then follow the instructions here:

How do I reset Windows Update components?
http://support.microsoft.com/kb/971058

Reboot.

CHKDSK
How to scan your disks for errors
http://support.microsoft.com/kb/315265
* will take time and a reboot.

Defragment
How to Defragment your hard drives
http://support.microsoft.com/kb/314848
* will take time

Ensure your hardware drivers are up to date (from the hardware
manufacturer's respective web pages.) Never get hardware drivers
for hardware that was not created/sold by Microsoft from Microsoft.

Reboot.

Log on as an user with administrative rights and open Internet Explorer
and visit http://windowsupdate.microsoft.com/ and select to do a
CUSTOM scan...

Every time you are about to click on something while at these web pages -
first press and hold down the CTRL key while you click on it. You can
release the CTRL key after clicking each time.

Once the scan is done, select just _ONE_ of the high priority updates
(deselect any others) and install it.

Reboot again.

If it did work - try the web page again - selecting no more than 3-5 at a
time. Rebooting as needed.

The Optional Software updates are generally safe - although I recommend
against the "Windows Search" one and any of the "Office Live" ones or
"Windows Live" ones for now. I would completely avoid the
Optional Hardware updates. Also - I do not see any urgent need to install
Internet Explorer 8 at this time.

Seriously - do all that. This is like antibiotics - don't skip a single
step, don't quit because you think things will be okay now - go through
until the end, until you have done everything given in the order given. If
you have a problem with a step come ask and let someone here get you
through that step. If you don't understand how to do a step, come back and
ask here about that step and let someone walk you through it.

Then - when done - let everyone here know if it worked for you - or if you
have more issues.
 
P

PA Bear [MS MVP]

Did you just install SP3?

What anti-virus application or security suite is installed and is your
subscription current? What anti-spyware applications (other than Defender)?
What third-party firewall (if any)? Were any of these applications running
in the background when you attempted to SP3?

Has a(another) Norton or McAfee application ever been installed on this
machine (e.g., a free-trial version that came preinstalled when you bought
it)?

WinXP SP3 - Read all prerequisites for a successful installation
http://msmvps.com/blogs/harrywaldro...requisites-for-a-successful-installation.aspx

Free unlimited installation and compatibility support for WinXP SP3 was
available from 14 April 2008 thru May 2009. Such support will cost you
US$59 per incident now.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads


Top