Problem connecting computers

[Derek]

Hi there,

a few days ago, I tried to connect 2 computers with a
cross-linked ethernet cable to transfer some files. I
actuall use a cable modem to get online so I had to
disconnect that to use the cross cable.

I fiddled around and tried to connect a network a few times
but could not get the 2 PCs to 'talk'. Frustrated, I
decided to connect my cable modem back. However, after
connecting it and restarting many times, playing around
with the network connections and reinstalling the ethernet
oprt drivers (it is in-built in my mainboard), I still
could not get it to work...

Any help would be greatly appreciated!!

Thanks in advance,
Derek

 

[Robert L [MS-MVP]]

we need more information to help. what are the IPs? or post the result of
ipconfig /all here.

--
For more and other information, go to http://www.ChicagoTech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.

 

[Derek]

The IP of one of the computers is : 169.254.58.252
The other computer doen't display any IPs however. It shows
only "Windows IP configuration".

 

[Robert L [MS-MVP]]

quoted from http://www.ChicagoTech.net
Can't obtain/renew IP addresses from the DHCP server

Symptoms: 1) you have a DHCP client which may not be able to obtain/renew IP
addresses from the DHCP server intermittently. 2) after setup a workstation
to obtain an IP address from DHCP, the machine can't ping others and
ipconfig /all shows Autoconfiguration IP Address. . . : 169.254.x.x.

Resolutions: 1) If this is XP, obtain the latest service pack for Windows
XP.
2) Use the Network Diagnostics tool to identify any failed settings. To do
this, go to Help and Support>Use Tools to view your computer information and
diagnose problems>Network Diagnostics>Scan your system. When the process
finishes, check for any items marked "FAILED" in red, expand those
categories, and view the additional details about what the testing showed.
3) Assign a static ip on the client and ping the DHCP server. If you can't
ping the DHCP server, check the connection and hardware.
4) If you can ping the DHCP after assigning static ip, check the DHCP
settings.
5) Make sure no firewall is running on your LAN.
6) Run Repair this connection if it is XP. Or use netsh to reset TCP/IP
configuration.
7) If it is win98/w2k, remove and reinstall TCP/IP.
8) Try to upgrade the new NIC driver.
9) Make sure you don't run out of IPs in the DHCP scope.


--
For more and other information, go to http://www.ChicagoTech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.