PCMCIA UNKNOWN_MANUFACTURER

G

Guest

I have a Motion M1300 Tablet PC and it recently came back from having the motherboard changed out from a PIIIM 800mhz to a Centrino 900mhz. Since it came back, every time I put a memory card in the PCMCIA slot it displays a message saying PCMCIA UNKNOWN_MANUFACTURER. I have tried uninstalling the PCMCIA bus (O2MICRO OZ6912 CARDBUS CONTROLLER), then re-booting so it re-installs - but still no happiness. I even tried loading a generic driver for the PCMCIA card, but all this achieved was locking up the PC.

The PCMCIA cards work 100% OK in all other PCs I have.

Anyone have any ideas / suggestions? I'm completely at a loss as to a fix.

Thanks to all
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Code 12 issue with NEC PCI to USB open host controller 0
SRAM and PCMCIA Flash Drivers 2
PCI to PCMCIA card 2
***Help Please ***Win XP Pro SP2 - WiFi 802.11g problems with Trendware cards TEW-423/421 + AP route 4
USB2 no quicker than USB1 17
Troubleshooting wi-fi connection 2
system freeze on capturing + camcorder not detected by XP 2
Built in SD-Card does not show drive letter 2

Top