P4S8X-X & celeron 2,4ghz, will them work??

  • Thread starter Thread starter Luis
  • Start date Start date
I have a 2.4 in the same board and have it overclock to 3.2 and it works
great

Homer
 
It's alive, alive!!!! (Dr. Henry Frankenstein, "Frankenstein" 1931)

thank you everybody!!!
 
How did you ot it????

which mem?
which bios parameters?
which cooler?
how high is temp??

thanks!!
 
All I did was crank up the front side bus to 133 and I am using pc 2700
memory set to auto. I did not change any other settings in my bios. Just
make sure you have good ventilation in your case. I have a 2 fan p4 power
supply, a front case fan and a rear pci slot fan. Under load my CPU goes up
to 52 C play 3d games online but now as I am typing this it is running at 29
C. I have gone higher than 133 all the way up to 141 fsb.

Homer
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Back
Top