Older USB hub and speed message from XP

[History Fan]

I have a computer running Windows XP Home SP2. I have a Belkin USB hub
plugged in, and it runs at the 1.1 speed. Every time I plug in a USB flash
drive, or digital camera, Windows informs me about this slower connection
and recommends I try a USB 2.0 port. Is there a way to disable this
message?

 

[GreenieLeBrun]

I have a computer running Windows XP Home SP2. I have a Belkin USB
hub plugged in, and it runs at the 1.1 speed. Every time I plug in a USB
flash drive, or digital camera, Windows informs me about this slower
connection and recommends I try a USB 2.0 port. Is there a way to disable
this message?

Yes, in Device Manager, under Hardware expand the USB controllers section
right click on the Host controller entry, select Properties and under the
Advanced Tab there should be a "Don't tell me about USB errors" tick box,
tick it then click OK. You may have to do this for all the Host controllers.

 

[Bob I]

Why not get a 2.0 capable hub. 12 mbps VS 480 mbps is vast difference in
speed.

 

[Yves Leclerc]

Is the computer's USB is USB 2.0?????

Why not get a 2.0 capable hub. 12 mbps VS 480 mbps is vast difference in
speed.

 

[History Fan]

Is the computer's USB is USB 2.0?????

Yes, the regular ports on the computer are operating at USB 2.0.

 

[History Fan]

Why not get a 2.0 capable hub. 12 mbps VS 480 mbps is vast difference in
speed.

I probably will eventually.