Z
zecarioca
I have an existing Celeron 1.2 Ghz EMachine with a WD
Caviar 40 Gig hard drive and running on Window XP Home
Edition.
I just purchased a new computer with almost the same
setup, that is, an EMachine with WD Caviar 40 Gog hard
drive and running on Windows XP Home Edition.
The main difference between the two computers is that the
new machine is a Celeron 2.6 Ghz and the motherboard is
different.
I wanted to use my old hard drive in the new machine to
avoid having to reinstall all my software and settings in
the new drive. However, when I put in the old drive in
the new computer, I cannot even get the machine to
recognize the old hard drive. I get the blue error
message screen with the code 0x0000007B.
In talking to Emachine tech support, they indicated that
this message indicates that the old hard drive does not
have the hard drive controller driver and chipset drivers
for the new motherboard. Is there any way I can install
these drivers on the old hard drive?
I have tried:
1- Putting both hard drives in the new computer as master
and slave. The machine will only boot up with the new
hard drive as the master, and this does not solve the
problem.
2- The EMachine only comes with a restore XP, so I cannot
reinstall XP over the old hard drive without erasing the
existing data.
3- I have downloaded the drivers from Intel but when I try
and install them (on old hard drive in old machine), it
does not allow me to as it says the system already all the
necessary drivers.
Any thoughts???
thanks,
Caviar 40 Gig hard drive and running on Window XP Home
Edition.
I just purchased a new computer with almost the same
setup, that is, an EMachine with WD Caviar 40 Gog hard
drive and running on Windows XP Home Edition.
The main difference between the two computers is that the
new machine is a Celeron 2.6 Ghz and the motherboard is
different.
I wanted to use my old hard drive in the new machine to
avoid having to reinstall all my software and settings in
the new drive. However, when I put in the old drive in
the new computer, I cannot even get the machine to
recognize the old hard drive. I get the blue error
message screen with the code 0x0000007B.
In talking to Emachine tech support, they indicated that
this message indicates that the old hard drive does not
have the hard drive controller driver and chipset drivers
for the new motherboard. Is there any way I can install
these drivers on the old hard drive?
I have tried:
1- Putting both hard drives in the new computer as master
and slave. The machine will only boot up with the new
hard drive as the master, and this does not solve the
problem.
2- The EMachine only comes with a restore XP, so I cannot
reinstall XP over the old hard drive without erasing the
existing data.
3- I have downloaded the drivers from Intel but when I try
and install them (on old hard drive in old machine), it
does not allow me to as it says the system already all the
necessary drivers.
Any thoughts???
thanks,