No sound once tranferred to DV Camcorder

[Guest]

I have a Samsung SCD67 miniDV camcorder. In WMM my video & audio play great,
however when I click "Send to DV camera" everything goes fine looks good, and
then I plug my camcorder into the RCA jacks on my tv rewind the video and
when I play the clip the video comes out great on the TV but there is no
sound at all, so I try to watch & listen to the clip through the camcorders
flip screen and built in speaker, video looks great but still no sound.

So I assume that the audio isn't even being tranferred out from WMM to the
camcorder, anyone have any suggestions?

 

[Graham Hughes]

Try using windv, a link is here
http://www.myvideoproblems.com/WebPages/UsefulProgrammes.htm
Make an avi file from MM adn sue windv. If this doesn't work, come back adn
we'll dig deeper.
--
Graham Hughes
MVP Digital Media
www.myvideoproblems.co.uk
www.dvds2treasure.com
www.simplydv.com

 

[Guest]

Well, I believe the problem lies with my camcorder.

I tried the WinDV and it was a no go. So I started messing around with some
different stuff, first I bought a new A/V cable to see if maybe my original
A/V cable was shot, it still didn't work. So I started to stress out and for
whatever reason decided to recapture the footage that I just put onto the DV
camcorder back into WMM, when I previewed the recapured clip I found out that
it did indeed capture the sound.

So the audio problem lies in the sound output of the DV camcorder. Must be
fried or a lose wire or something, I don't suppose there is a way to "reboot"
a DV camcorder. I will probably call Samsung in a few days, the worst part is
my extended warrenty just ended three month's ago.

 

[Graham Hughes]

check the sound settings in the camcorder. if mm is using 16 bit, make sure
the camcorder is as well.

--
Graham Hughes
MVP Digital Media
www.myvideoproblems.co.uk
www.dvds2treasure.com
www.simplydv.com