No Internet After Resuming From Standby

  • Thread starter Thread starter =?ISO-8859-1?Q?=D0=EF=C5=DF=F6=A5=F8=A7=A9?=
  • Start date Start date
?

=?ISO-8859-1?Q?=D0=EF=C5=DF=F6=A5=F8=A7=A9?=

For some reason after I resume from standby mode my Internet connection
is always dead. The "limited or no connectivity" notice pops up and
nothing requiring an Internet connection has access. I am forced to
reboot to get it to work again. So I've started to have to either leave
the computer on or completely shut it off.
Does anyone know anything about the possible reasons for this and how to
fix it?
 
ÐïÅßö¥ø§© said:
For some reason after I resume from standby mode my Internet connection
is always dead. The "limited or no connectivity" notice pops up and
nothing requiring an Internet connection has access. I am forced to
reboot to get it to work again. So I've started to have to either leave
the computer on or completely shut it off.
Does anyone know anything about the possible reasons for this and how to
fix it?
Click to expand...

Open Device Manager, open the properties on your ethernet card, click
the Power tab, and deselect "Allow the computer to turn off this device
to save power". If the internet connection is through a USB port, do
the same thing with all USB Root Hubs.
 
Elmo said:
Open Device Manager, open the properties on your ethernet card, click
the Power tab, and deselect "Allow the computer to turn off this device
to save power". If the internet connection is through a USB port, do
the same thing with all USB Root Hubs.
Click to expand...

I don't have a Power tab in the properties of my Ethernet card. I have
General, Advanced, Driver, Details and Resources. None of those has any
power option to turn off.
Any other ways to do it?
 
Anyone?
Click to expand...

I have a similar problem. I tried the suggestion about not shutting off power
to the ethernet "Card" during standby, but it did not help. What I have
resorted to is unplugging the LinkSys Router for about 10 seconds, then I plug
it back in. (It has no on/off switch). This is crude, but it beats re-booting.
 
ÐïÅßö¥ø§© said:
For some reason after I resume from standby mode my Internet connection
is always dead. The "limited or no connectivity" notice pops up and
nothing requiring an Internet connection has access. I am forced to
reboot to get it to work again. So I've started to have to either
leave the computer on or completely shut it off.
Does anyone know anything about the possible reasons for this and how
to fix it?
Click to expand...

I have the same problem occasionally. I've found it sometimes works to
right-click the connection icon in the System Tray and choose Disable,
wait a few seconds and then Enable (if you don't have the icon, go to
Control Panel | Network Connections, right-click the connection and do
the same). Otherwise it's a reboot, I'm afraid.

I'm currently experimenting with Hibernation instead.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Standby Internet 1
PC shuts down after resuming from standby or hibernation. 2
Resume From Standby 1
Switch WIndows XP to standby mode every 2 hours and resume normal after 1 minute 13
Restarting by itself from standby mode 4
Resuming from Standby is a normal boot-up process 14
Standby problem 3
Freeze on resuming from standby 3

Back
Top