New pc not recognized on network

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I have three Pcs connected together via a Dlink 704p router.
Pc1 computer name gigi, winxp not sp2
Pc2 computer name vieuxpc win 98 (not se)
Pc3 computer name PROSYS1 WinXP Sp2

When I installed the new pc I ran the network wizard and connected it to the
network ans was able to see the others in network neiborhood. I still have
the names of the shared folders in network favorites.
I then proceeded to copy some files to my new hard disk, install various
software and created userids on the new pc.
I have tried disabling network firewall, to no avail.
When I ping pc3 from pc1 I see the network connectionicon blink four times.
The first time, both screens light up, the other three, only the right hand
icon blinks.
Any help on the matter will be greatly appreciated.
I then transferred my printer to pc3 and tried to share it with the others.
At that time I discoverd that I could not explore pc3 from either PC1 or Pc2
via the network neigborhood although Pc3 appears in the list of pcs in the
network
I can't ping the ip address which is generated by my router from either pc1
or pc2 or the router itself.
Pc3 can ping the other two pcs, the router and itself.
The network connection on pc3 has the correct ip address subnet id etc...
My two other Pcs have zone alarm installled but not activated. I had
installed zone alarm on pc3 but have uninstalled it
I have run pchuck's cdiag and from pc1 and pc3 and the results indicate that
from pc1 the pc3 name is resolved to the correct ip address but the ping
request times out.
I had not tried to ping pc3 from the other two until I noticed the problem
in trying to share the printer.
 
I have three Pcs connected together via a Dlink 704p router.
Pc1 computer name gigi, winxp not sp2
Pc2 computer name vieuxpc win 98 (not se)
Pc3 computer name PROSYS1 WinXP Sp2

When I installed the new pc I ran the network wizard and connected it to the
network ans was able to see the others in network neiborhood. I still have
the names of the shared folders in network favorites.
I then proceeded to copy some files to my new hard disk, install various
software and created userids on the new pc.
I have tried disabling network firewall, to no avail.
When I ping pc3 from pc1 I see the network connectionicon blink four times.
The first time, both screens light up, the other three, only the right hand
icon blinks.
Any help on the matter will be greatly appreciated.
I then transferred my printer to pc3 and tried to share it with the others.
At that time I discoverd that I could not explore pc3 from either PC1 or Pc2
via the network neigborhood although Pc3 appears in the list of pcs in the
network
I can't ping the ip address which is generated by my router from either pc1
or pc2 or the router itself.
Pc3 can ping the other two pcs, the router and itself.
The network connection on pc3 has the correct ip address subnet id etc...
My two other Pcs have zone alarm installled but not activated. I had
installed zone alarm on pc3 but have uninstalled it
I have run pchuck's cdiag and from pc1 and pc3 and the results indicate that
from pc1 the pc3 name is resolved to the correct ip address but the ping
request times out.
I had not tried to ping pc3 from the other two until I noticed the problem
in trying to share the printer.
Click to expand...

Stan,

If you can actually resolve PC3 by name, then it sounds like you had
connectivity at one time. What happens if you clear the name resolution cache
("nbtstat -R"), then try pinging by name?

The ping command is pretty low level. Did it not work before you tried un
installing ZA? Un installing may not be an easy task. Look for an unrecognised
personal firewall, and look for LSP / Winsock corruption too.
<http://nitecruzr.blogspot.com/2005/05/your-personal-firewall-can-either-help.html>
http://nitecruzr.blogspot.com/2005/05/your-personal-firewall-can-either-help.html
<http://nitecruzr.blogspot.com/2005/05/problems-with-lsp-winsock-layer-in.html>
http://nitecruzr.blogspot.com/2005/05/problems-with-lsp-winsock-layer-in.html
 
cdiag for pc gigi
Pc runs win xp in french.
CDiagnosis V1.40
Start diagnosis for GIGI
Full Targets vieuxpc 192.168.0.145 gigi 192.168.0.162 PROSYS1 192.168.0.110
127.0.0.1
Ping Targets www.yahoo.com 66.94.230.32 192.168.0.1

Over All Analysis

Enumerate Shares


Nom partage Ressource Remarque

-------------------------------------------------------------------------------
IPC$ IPC distant

D$ D:\ Partage par d‚faut

ADMIN$ D:\WINDOWS Administration … distance

print$ D:\WINDOWS\System32\spool\drivers
Pilotes d'imprimantes

C$ C:\ Partage par d‚faut

SharedDocs D:\DOCUMENTS AND SETTINGS\ALL USERS\DOCUMENTS

BrotherH1 LPT1: Mis en f Brother HL-1030 series (Copie
1)
La commande s'est termin‚e correctement.


Adhoc Browser View


Full Targets Analysis vieuxpc 192.168.0.145 gigi 192.168.0.162 PROSYS1
192.168.0.110 127.0.0.1

Target vieuxpc

"GIGI ping vieuxpc"



Envoi d'une requˆte 'ping' sur vieuxpc [192.168.0.145] avec 32 octets de
donn‚esÿ:



R‚ponse de 192.168.0.145ÿ: octets=32 temps<1ms TTL=64

R‚ponse de 192.168.0.145ÿ: octets=32 temps<1ms TTL=64

R‚ponse de 192.168.0.145ÿ: octets=32 temps<1ms TTL=64

R‚ponse de 192.168.0.145ÿ: octets=32 temps<1ms TTL=64



Statistiques Ping pour 192.168.0.145:

Paquetsÿ: envoy‚s = 4, re‡us = 4, perdus = 0 (perte 0%),

Dur‚e approximative des boucles en millisecondes :

Minimum = 0ms, Maximum = 0ms, Moyenne = 0ms


"GIGI net view vieuxpc"


Target 192.168.0.145

"GIGI ping 192.168.0.145"



Envoi d'une requˆte 'ping' sur 192.168.0.145 avec 32 octets de donn‚esÿ:



R‚ponse de 192.168.0.145ÿ: octets=32 temps<1ms TTL=64

R‚ponse de 192.168.0.145ÿ: octets=32 temps<1ms TTL=64

R‚ponse de 192.168.0.145ÿ: octets=32 temps<1ms TTL=64

R‚ponse de 192.168.0.145ÿ: octets=32 temps<1ms TTL=64



Statistiques Ping pour 192.168.0.145:

Paquetsÿ: envoy‚s = 4, re‡us = 4, perdus = 0 (perte 0%),

Dur‚e approximative des boucles en millisecondes :

Minimum = 0ms, Maximum = 0ms, Moyenne = 0ms


"GIGI net view 192.168.0.145"


Target gigi

"GIGI ping gigi"



Envoi d'une requˆte 'ping' sur gigi [192.168.0.162] avec 32 octets de
donn‚esÿ:



R‚ponse de 192.168.0.162ÿ: octets=32 temps<1ms TTL=128

R‚ponse de 192.168.0.162ÿ: octets=32 temps<1ms TTL=128

R‚ponse de 192.168.0.162ÿ: octets=32 temps<1ms TTL=128

R‚ponse de 192.168.0.162ÿ: octets=32 temps<1ms TTL=128



Statistiques Ping pour 192.168.0.162:

Paquetsÿ: envoy‚s = 4, re‡us = 4, perdus = 0 (perte 0%),

Dur‚e approximative des boucles en millisecondes :

Minimum = 0ms, Maximum = 0ms, Moyenne = 0ms


"GIGI net view gigi"

Ressources partag‚es de gigi

Gigi sur Win XP

Nom du partage Type Utilis‚ comme Commentaire

-------------------------------------------------------------------------------
BrotherH1 Impr. Brother HL-1030 series (Copie 1)
SharedDocs Disque
La commande s'est termin‚e correctement.


Target 192.168.0.162

"GIGI ping 192.168.0.162"



Envoi d'une requˆte 'ping' sur 192.168.0.162 avec 32 octets de donn‚esÿ:



R‚ponse de 192.168.0.162ÿ: octets=32 temps<1ms TTL=128

R‚ponse de 192.168.0.162ÿ: octets=32 temps<1ms TTL=128

R‚ponse de 192.168.0.162ÿ: octets=32 temps<1ms TTL=128

R‚ponse de 192.168.0.162ÿ: octets=32 temps<1ms TTL=128



Statistiques Ping pour 192.168.0.162:

Paquetsÿ: envoy‚s = 4, re‡us = 4, perdus = 0 (perte 0%),

Dur‚e approximative des boucles en millisecondes :

Minimum = 0ms, Maximum = 0ms, Moyenne = 0ms


"GIGI net view 192.168.0.162"

Ressources partag‚es de 192.168.0.162

Gigi sur Win XP

Nom du partage Type Utilis‚ comme Commentaire

-------------------------------------------------------------------------------
BrotherH1 Impr. Brother HL-1030 series (Copie 1)
SharedDocs Disque
La commande s'est termin‚e correctement.


Target PROSYS1

"GIGI ping PROSYS1"

La requˆte Ping n'a pas pu trouver l'h“te PROSYS1. V‚rifiez le nom et
essayez … nouveau.


"GIGI net view PROSYS1"


Target 192.168.0.110

"GIGI ping 192.168.0.110"



Envoi d'une requˆte 'ping' sur 192.168.0.110 avec 32 octets de donn‚esÿ:



D‚lai d'attente de la demande d‚pass‚.

D‚lai d'attente de la demande d‚pass‚.

D‚lai d'attente de la demande d‚pass‚.

D‚lai d'attente de la demande d‚pass‚.



Statistiques Ping pour 192.168.0.110:

Paquetsÿ: envoy‚s = 4, re‡us = 0, perdus = 4 (perte 100%),


"GIGI net view 192.168.0.110"


Target 127.0.0.1

"GIGI ping 127.0.0.1"



Envoi d'une requˆte 'ping' sur 127.0.0.1 avec 32 octets de donn‚esÿ:



R‚ponse de 127.0.0.1ÿ: octets=32 temps<1ms TTL=128

R‚ponse de 127.0.0.1ÿ: octets=32 temps<1ms TTL=128

R‚ponse de 127.0.0.1ÿ: octets=32 temps<1ms TTL=128

R‚ponse de 127.0.0.1ÿ: octets=32 temps<1ms TTL=128



Statistiques Ping pour 127.0.0.1:

Paquetsÿ: envoy‚s = 4, re‡us = 4, perdus = 0 (perte 0%),

Dur‚e approximative des boucles en millisecondes :

Minimum = 0ms, Maximum = 0ms, Moyenne = 0ms


"GIGI net view 127.0.0.1"

Ressources partag‚es de 127.0.0.1

Gigi sur Win XP

Nom du partage Type Utilis‚ comme Commentaire

-------------------------------------------------------------------------------
BrotherH1 Impr. Brother HL-1030 series (Copie 1)
SharedDocs Disque
La commande s'est termin‚e correctement.



Target www.yahoo.com

"GIGI ping www.yahoo.com"



Envoi d'une requˆte 'ping' sur www.yahoo-ht2.akadns.net [209.73.186.238]
avec 32 octets de donn‚esÿ:



R‚ponse de 209.73.186.238ÿ: octets=32 temps=65 ms TTL=50

R‚ponse de 209.73.186.238ÿ: octets=32 temps=63 ms TTL=50

R‚ponse de 209.73.186.238ÿ: octets=32 temps=64 ms TTL=50

R‚ponse de 209.73.186.238ÿ: octets=32 temps=64 ms TTL=50



Statistiques Ping pour 209.73.186.238:

Paquetsÿ: envoy‚s = 4, re‡us = 4, perdus = 0 (perte 0%),

Dur‚e approximative des boucles en millisecondes :

Minimum = 63ms, Maximum = 65ms, Moyenne = 64ms


Target 66.94.230.32

"GIGI ping 66.94.230.32"



Envoi d'une requˆte 'ping' sur 66.94.230.32 avec 32 octets de donn‚esÿ:



R‚ponse de 66.94.230.32ÿ: octets=32 temps=126 ms TTL=47

R‚ponse de 66.94.230.32ÿ: octets=32 temps=132 ms TTL=52

R‚ponse de 66.94.230.32ÿ: octets=32 temps=139 ms TTL=50

R‚ponse de 66.94.230.32ÿ: octets=32 temps=133 ms TTL=50



Statistiques Ping pour 66.94.230.32:

Paquetsÿ: envoy‚s = 4, re‡us = 4, perdus = 0 (perte 0%),

Dur‚e approximative des boucles en millisecondes :

Minimum = 126ms, Maximum = 139ms, Moyenne = 132ms


Target 192.168.0.1

"GIGI ping 192.168.0.1"



Envoi d'une requˆte 'ping' sur 192.168.0.1 avec 32 octets de donn‚esÿ:



R‚ponse de 192.168.0.1ÿ: octets=32 temps<1ms TTL=64

R‚ponse de 192.168.0.1ÿ: octets=32 temps<1ms TTL=64

R‚ponse de 192.168.0.1ÿ: octets=32 temps<1ms TTL=64

R‚ponse de 192.168.0.1ÿ: octets=32 temps<1ms TTL=64



Statistiques Ping pour 192.168.0.1:

Paquetsÿ: envoy‚s = 4, re‡us = 4, perdus = 0 (perte 0%),

Dur‚e approximative des boucles en millisecondes :

Minimum = 0ms, Maximum = 0ms, Moyenne = 0ms


End diagnosis for GIGI

cdiag on pc PROSYS1
CDiagnosis V1.40
Start diagnosis for PROSYS1
Full Targets vieuxpc 192.168.0.145 gigi 192.168.0.162 PROSYS1 192.168.0.110
127.0.0.1
Ping Targets www.yahoo.com 66.94.230.32 192.168.0.1

Over All Analysis

Enumerate Shares


Nom partage Ressource Remarque

-------------------------------------------------------------------------------
IPC$ IPC distant

print$ C:\WINDOWS\system32\spool\drivers
Pilotes d'imprimantes

Doc part Xp C:\Documents and Settings\client\Mes documents\Documents partag‚s

Mes images C:\Documents and Settings\All Users\Documents\Mes images

SharedDocs C:\DOCUMENTS AND SETTINGS\ALL USERS\DOCUMENTS

STAN C:\Documents and Settings\client\Mes documents\STAN

Imprimante LPT1: Mis en f Imprimante PDF Quicken

La commande s'est termin‚e correctement.


Adhoc Browser View

Nom de serveur Remarque

-------------------------------------------------------------------------------
\\PROSYS1 Ordi de Stan sur win xp

La commande s'est termin‚e correctement.


Full Targets Analysis vieuxpc 192.168.0.145 gigi 192.168.0.162 PROSYS1
192.168.0.110 127.0.0.1

Target vieuxpc

"PROSYS1 ping vieuxpc"



Envoi d'une requˆte 'ping' sur vieuxpc [192.168.0.145] avec 32 octets de
donn‚esÿ:



R‚ponse de 192.168.0.145ÿ: octets=32 temps<1ms TTL=64

R‚ponse de 192.168.0.145ÿ: octets=32 temps<1ms TTL=64

R‚ponse de 192.168.0.145ÿ: octets=32 temps<1ms TTL=64

R‚ponse de 192.168.0.145ÿ: octets=32 temps<1ms TTL=64



Statistiques Ping pour 192.168.0.145:

Paquetsÿ: envoy‚s = 4, re‡us = 4, perdus = 0 (perte 0%),

Dur‚e approximative des boucles en millisecondes :

Minimum = 0ms, Maximum = 0ms, Moyenne = 0ms


"PROSYS1 net view vieuxpc"


Target 192.168.0.145

"PROSYS1 ping 192.168.0.145"



Envoi d'une requˆte 'ping' sur 192.168.0.145 avec 32 octets de donn‚esÿ:



R‚ponse de 192.168.0.145ÿ: octets=32 temps<1ms TTL=64

R‚ponse de 192.168.0.145ÿ: octets=32 temps<1ms TTL=64

R‚ponse de 192.168.0.145ÿ: octets=32 temps<1ms TTL=64

R‚ponse de 192.168.0.145ÿ: octets=32 temps<1ms TTL=64



Statistiques Ping pour 192.168.0.145:

Paquetsÿ: envoy‚s = 4, re‡us = 4, perdus = 0 (perte 0%),

Dur‚e approximative des boucles en millisecondes :

Minimum = 0ms, Maximum = 0ms, Moyenne = 0ms


"PROSYS1 net view 192.168.0.145"


Target gigi

"PROSYS1 ping gigi"



Envoi d'une requˆte 'ping' sur gigi [192.168.0.162] avec 32 octets de
donn‚esÿ:



R‚ponse de 192.168.0.162ÿ: octets=32 temps<1ms TTL=128

R‚ponse de 192.168.0.162ÿ: octets=32 temps<1ms TTL=128

R‚ponse de 192.168.0.162ÿ: octets=32 temps<1ms TTL=128

R‚ponse de 192.168.0.162ÿ: octets=32 temps<1ms TTL=128



Statistiques Ping pour 192.168.0.162:

Paquetsÿ: envoy‚s = 4, re‡us = 4, perdus = 0 (perte 0%),

Dur‚e approximative des boucles en millisecondes :

Minimum = 0ms, Maximum = 0ms, Moyenne = 0ms


"PROSYS1 net view gigi"

Ressources partag‚es de gigi

Gigi sur Win XP

Nom du partage Type Utilis‚ comme Commentaire

-------------------------------------------------------------------------------
BrotherH1 Impr. Brother HL-1030 series (Copie 1)
SharedDocs Disque
La commande s'est termin‚e correctement.


Target 192.168.0.162

"PROSYS1 ping 192.168.0.162"



Envoi d'une requˆte 'ping' sur 192.168.0.162 avec 32 octets de donn‚esÿ:



R‚ponse de 192.168.0.162ÿ: octets=32 temps<1ms TTL=128

R‚ponse de 192.168.0.162ÿ: octets=32 temps<1ms TTL=128

R‚ponse de 192.168.0.162ÿ: octets=32 temps<1ms TTL=128

R‚ponse de 192.168.0.162ÿ: octets=32 temps<1ms TTL=128



Statistiques Ping pour 192.168.0.162:

Paquetsÿ: envoy‚s = 4, re‡us = 4, perdus = 0 (perte 0%),

Dur‚e approximative des boucles en millisecondes :

Minimum = 0ms, Maximum = 0ms, Moyenne = 0ms


"PROSYS1 net view 192.168.0.162"

Ressources partag‚es de 192.168.0.162

Gigi sur Win XP

Nom du partage Type Utilis‚ comme Commentaire

-------------------------------------------------------------------------------
BrotherH1 Impr. Brother HL-1030 series (Copie 1)
SharedDocs Disque
La commande s'est termin‚e correctement.


Target PROSYS1

"PROSYS1 ping PROSYS1"



Envoi d'une requˆte 'ping' sur PROSYS1 [192.168.0.110] avec 32 octets de
donn‚esÿ:



R‚ponse de 192.168.0.110ÿ: octets=32 temps<1ms TTL=128

R‚ponse de 192.168.0.110ÿ: octets=32 temps<1ms TTL=128

R‚ponse de 192.168.0.110ÿ: octets=32 temps<1ms TTL=128

R‚ponse de 192.168.0.110ÿ: octets=32 temps<1ms TTL=128



Statistiques Ping pour 192.168.0.110:

Paquetsÿ: envoy‚s = 4, re‡us = 4, perdus = 0 (perte 0%),

Dur‚e approximative des boucles en millisecondes :

Minimum = 0ms, Maximum = 0ms, Moyenne = 0ms


"PROSYS1 net view PROSYS1"

Ressources partag‚es de PROSYS1

Ordi de Stan sur win xp

Nom du partage Type Utilis‚ comme Commentaire

-------------------------------------------------------------------------------
Doc part Xp Disque
Imprimante Impr. Imprimante PDF Quicken
Mes images Disque
SharedDocs Disque
STAN Disque
La commande s'est termin‚e correctement.


Target 192.168.0.110

"PROSYS1 ping 192.168.0.110"



Envoi d'une requˆte 'ping' sur 192.168.0.110 avec 32 octets de donn‚esÿ:



R‚ponse de 192.168.0.110ÿ: octets=32 temps<1ms TTL=128

R‚ponse de 192.168.0.110ÿ: octets=32 temps<1ms TTL=128

R‚ponse de 192.168.0.110ÿ: octets=32 temps<1ms TTL=128

R‚ponse de 192.168.0.110ÿ: octets=32 temps<1ms TTL=128



Statistiques Ping pour 192.168.0.110:

Paquetsÿ: envoy‚s = 4, re‡us = 4, perdus = 0 (perte 0%),

Dur‚e approximative des boucles en millisecondes :

Minimum = 0ms, Maximum = 0ms, Moyenne = 0ms


"PROSYS1 net view 192.168.0.110"

Ressources partag‚es de 192.168.0.110

Ordi de Stan sur win xp

Nom du partage Type Utilis‚ comme Commentaire

-------------------------------------------------------------------------------
Doc part Xp Disque
Imprimante Impr. Imprimante PDF Quicken
Mes images Disque
SharedDocs Disque
STAN Disque
La commande s'est termin‚e correctement.


Target 127.0.0.1

"PROSYS1 ping 127.0.0.1"



Envoi d'une requˆte 'ping' sur 127.0.0.1 avec 32 octets de donn‚esÿ:



R‚ponse de 127.0.0.1ÿ: octets=32 temps<1ms TTL=128

R‚ponse de 127.0.0.1ÿ: octets=32 temps<1ms TTL=128

R‚ponse de 127.0.0.1ÿ: octets=32 temps<1ms TTL=128

R‚ponse de 127.0.0.1ÿ: octets=32 temps<1ms TTL=128



Statistiques Ping pour 127.0.0.1:

Paquetsÿ: envoy‚s = 4, re‡us = 4, perdus = 0 (perte 0%),

Dur‚e approximative des boucles en millisecondes :

Minimum = 0ms, Maximum = 0ms, Moyenne = 0ms


"PROSYS1 net view 127.0.0.1"

Ressources partag‚es de 127.0.0.1

Ordi de Stan sur win xp

Nom du partage Type Utilis‚ comme Commentaire

-------------------------------------------------------------------------------
Doc part Xp Disque
Imprimante Impr. Imprimante PDF Quicken
Mes images Disque
SharedDocs Disque
STAN Disque
La commande s'est termin‚e correctement.


Ping Targets Analysis www.yahoo.com 66.94.230.32 192.168.0.1

Target www.yahoo.com




Envoi d'une requˆte 'ping' sur www.yahoo-ht2.akadns.net [209.73.186.238]
avec 32 octets de donn‚esÿ:



R‚ponse de 209.73.186.238ÿ: octets=32 temps=63 ms TTL=50

R‚ponse de 209.73.186.238ÿ: octets=32 temps=65 ms TTL=50

R‚ponse de 209.73.186.238ÿ: octets=32 temps=65 ms TTL=50

R‚ponse de 209.73.186.238ÿ: octets=32 temps=65 ms TTL=50



Statistiques Ping pour 209.73.186.238:

Paquetsÿ: envoy‚s = 4, re‡us = 4, perdus = 0 (perte 0%),

Dur‚e approximative des boucles en millisecondes :

Minimum = 63ms, Maximum = 65ms, Moyenne = 64ms


Target 66.94.230.32




Envoi d'une requˆte 'ping' sur 66.94.230.32 avec 32 octets de donn‚esÿ:



R‚ponse de 66.94.230.32ÿ: octets=32 temps=133 ms TTL=50

R‚ponse de 66.94.230.32ÿ: octets=32 temps=134 ms TTL=50

R‚ponse de 66.94.230.32ÿ: octets=32 temps=132 ms TTL=52

R‚ponse de 66.94.230.32ÿ: octets=32 temps=126 ms TTL=47



Statistiques Ping pour 66.94.230.32:

Paquetsÿ: envoy‚s = 4, re‡us = 4, perdus = 0 (perte 0%),

Dur‚e approximative des boucles en millisecondes :

Minimum = 126ms, Maximum = 134ms, Moyenne = 131ms


Target 192.168.0.1




Envoi d'une requˆte 'ping' sur 192.168.0.1 avec 32 octets de donn‚esÿ:



R‚ponse de 192.168.0.1ÿ: octets=32 temps<1ms TTL=64

R‚ponse de 192.168.0.1ÿ: octets=32 temps<1ms TTL=64

R‚ponse de 192.168.0.1ÿ: octets=32 temps<1ms TTL=64

R‚ponse de 192.168.0.1ÿ: octets=32 temps<1ms TTL=64



Statistiques Ping pour 192.168.0.1:

Paquetsÿ: envoy‚s = 4, re‡us = 4, perdus = 0 (perte 0%),

Dur‚e approximative des boucles en millisecondes :

Minimum = 0ms, Maximum = 0ms, Moyenne = 0ms


End diagnosis for PROSYS1
 
My mistake, I misinterpreted the ouput. I ran browstat on gigi and on prosys1.
here is the ouput
Microsoft Windows XP [version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

D:\>browstat sta


Status for domain STANLEY on transport
\Device\NetBT_Tcpip_{97474D56-976B-47B6-A
8C8-DA5407BF720C}
Browsing is active on domain.
Master browser name is: GIGI
Master browser is running build 2600
1 backup servers retrieved from master GIGI
\\GIGI
There are 3 servers in domain STANLEY on transport
\Device\NetBT_Tcpip_{9747
4D56-976B-47B6-A8C8-DA5407BF720C}
There are 1 domains in domain STANLEY on transport
\Device\NetBT_Tcpip_{9747
4D56-976B-47B6-A8C8-DA5407BF720C}

D:\>
When I go to the network neighborhood and ask to see all computers on the
network I see three pcs. When I double click on PROSYS1 I get the message
Prosys1 is unavailable you may not have the authority etc...
Network path not found
 
browstat output on prosys1
Status for domain STANLEY on transport
\Device\NetBT_Tcpip_{B40399D1-1DA2-4B7B-9
26D-6B1B492DFFD4}
Browsing is NOT active on domain.
Master browser name is held by: GIGI
Could not connect to registry, error = 53 Unable to determine build
of br
owser master: 53
\\GIGI . Version:05.01 Flags: 51203 NT POTENTIAL MASTER
C:\Documents and Settings\client>
 
I stopped the browser service on gigi and started it on prossys1, here is the
output from brostat sta,
Microsoft Windows XP [version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\client>browstat sta


Status for domain STANLEY on transport
\Device\NetBT_Tcpip_{B40399D1-1DA2-4B7B-9
26D-6B1B492DFFD4}
Browsing is active on domain.
Master browser name is: PROSYS1
Master browser is running build 2600
1 backup servers retrieved from master PROSYS1
\\PROSYS1
There are 1 servers in domain STANLEY on transport
\Device\NetBT_Tcpip_{B403
99D1-1DA2-4B7B-926D-6B1B492DFFD4}
There are 1 domains in domain STANLEY on transport
\Device\NetBT_Tcpip_{B403
99D1-1DA2-4B7B-926D-6B1B492DFFD4}

C:\Documents and Settings\client>
Browsing from prosys1 does not seem to detect the other members of the network
 
I stopped the browser service on gigi and started it on prossys1, here is the
output from brostat sta,
Microsoft Windows XP [version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\client>browstat sta


Status for domain STANLEY on transport
\Device\NetBT_Tcpip_{B40399D1-1DA2-4B7B-9
26D-6B1B492DFFD4}
Browsing is active on domain.
Master browser name is: PROSYS1
Master browser is running build 2600
1 backup servers retrieved from master PROSYS1
\\PROSYS1
There are 1 servers in domain STANLEY on transport
\Device\NetBT_Tcpip_{B403
99D1-1DA2-4B7B-926D-6B1B492DFFD4}
There are 1 domains in domain STANLEY on transport
\Device\NetBT_Tcpip_{B403
99D1-1DA2-4B7B-926D-6B1B492DFFD4}

C:\Documents and Settings\client>
Browsing from prosys1 does not seem to detect the other members of the network
Click to expand...

Is NetBT consistently Enabled?
<http://nitecruzr.blogspot.com/2006/04/netbios-over-tcpip.html>
http://nitecruzr.blogspot.com/2006/04/netbios-over-tcpip.html

Beyond that, I'll repeat the possibility of an unrecognised personal firewall,
or LSP / Winsock corruption.
<http://nitecruzr.blogspot.com/2005/05/your-personal-firewall-can-either-help.html>
http://nitecruzr.blogspot.com/2005/05/your-personal-firewall-can-either-help.html
<http://nitecruzr.blogspot.com/2005/05/problems-with-lsp-winsock-layer-in.html>
http://nitecruzr.blogspot.com/2005/05/problems-with-lsp-winsock-layer-in.html>
 
NetBT is consistently set on both win xp pcs
Not sure how to check or set on win98--
When browser is turned off on PROSYS1 AND GIGI, browstat status displays the
following on PROSYS1
C:\Documents and Settings\client>browstat sta


Status for domain STANLEY on transport \Device\NetBT_Tcpip_{B40399D1-1DA2-4B7
26D-6B1B492DFFD4}

C:\Documents and Settings\client>browstat listwfw STANLEY
Calling NetServerEnum to enumerate WFW servers.
Unable to enumerate WFW servers. Error: La liste des serveurs de ce groupe
de tr
avail n'est pas disponible actuellement(List of servers in this workgroup is
unavailble at this time)


C:\Documents and Settings\client>
Browsing is NOT active on domain.
Master browser name is held by: VIEUXPC
Could not connect to registry, error = 53 Unable to determine build of
browser master: 53
\\VIEUXPC . Version:04.00 Flags: 452003 WFW POTENTIAL MASTER
C:\Documents and Settings\client>
PROSYS1 is running win xp home while GIGI is running xp pro
VIEUXPC is running WIN98


Stan


Chuck said:
I stopped the browser service on gigi and started it on prossys1, here is the
output from brostat sta,
Microsoft Windows XP [version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\client>browstat sta


Status for domain STANLEY on transport
\Device\NetBT_Tcpip_{B40399D1-1DA2-4B7B-9
26D-6B1B492DFFD4}
Browsing is active on domain.
Master browser name is: PROSYS1
Master browser is running build 2600
1 backup servers retrieved from master PROSYS1
\\PROSYS1
There are 1 servers in domain STANLEY on transport
\Device\NetBT_Tcpip_{B403
99D1-1DA2-4B7B-926D-6B1B492DFFD4}
There are 1 domains in domain STANLEY on transport
\Device\NetBT_Tcpip_{B403
99D1-1DA2-4B7B-926D-6B1B492DFFD4}

C:\Documents and Settings\client>
Browsing from prosys1 does not seem to detect the other members of the network
Click to expand...

Is NetBT consistently Enabled?
<http://nitecruzr.blogspot.com/2006/04/netbios-over-tcpip.html>
http://nitecruzr.blogspot.com/2006/04/netbios-over-tcpip.html

Beyond that, I'll repeat the possibility of an unrecognised personal firewall,
or LSP / Winsock corruption.
<http://nitecruzr.blogspot.com/2005/05/your-personal-firewall-can-either-help.html>
http://nitecruzr.blogspot.com/2005/05/your-personal-firewall-can-either-help.html
<http://nitecruzr.blogspot.com/2005/05/problems-with-lsp-winsock-layer-in.html>
http://nitecruzr.blogspot.com/2005/05/problems-with-lsp-winsock-layer-in.html>
Click to expand...
 
Hi Chuck, my problem has been resolved. In desperation I reinstalled ZLID
and the first thing it did was ask me if I wanted to authorize my router.
Problem resolved.
I guess it must have left somwthing behind that prevented my pc from
accecpting traffic from the router.
Something to do with True vector maybe?

Thanks for your suggestions.
--
Stan


Chuck said:
I stopped the browser service on gigi and started it on prossys1, here is the
output from brostat sta,
Microsoft Windows XP [version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\client>browstat sta


Status for domain STANLEY on transport
\Device\NetBT_Tcpip_{B40399D1-1DA2-4B7B-9
26D-6B1B492DFFD4}
Browsing is active on domain.
Master browser name is: PROSYS1
Master browser is running build 2600
1 backup servers retrieved from master PROSYS1
\\PROSYS1
There are 1 servers in domain STANLEY on transport
\Device\NetBT_Tcpip_{B403
99D1-1DA2-4B7B-926D-6B1B492DFFD4}
There are 1 domains in domain STANLEY on transport
\Device\NetBT_Tcpip_{B403
99D1-1DA2-4B7B-926D-6B1B492DFFD4}

C:\Documents and Settings\client>
Browsing from prosys1 does not seem to detect the other members of the network
Click to expand...

Is NetBT consistently Enabled?
<http://nitecruzr.blogspot.com/2006/04/netbios-over-tcpip.html>
http://nitecruzr.blogspot.com/2006/04/netbios-over-tcpip.html

Beyond that, I'll repeat the possibility of an unrecognised personal firewall,
or LSP / Winsock corruption.
<http://nitecruzr.blogspot.com/2005/05/your-personal-firewall-can-either-help.html>
http://nitecruzr.blogspot.com/2005/05/your-personal-firewall-can-either-help.html
<http://nitecruzr.blogspot.com/2005/05/problems-with-lsp-winsock-layer-in.html>
http://nitecruzr.blogspot.com/2005/05/problems-with-lsp-winsock-layer-in.html>
Click to expand...
 
Hi Chuck, my problem has been resolved. In desperation I reinstalled ZLID
and the first thing it did was ask me if I wanted to authorize my router.
Problem resolved.
I guess it must have left somwthing behind that prevented my pc from
accecpting traffic from the router.
Something to do with True vector maybe?

Thanks for your suggestions.
Click to expand...

Thanks for the update, Stan. Glad you found the problem.
 
Back
Top