Networked Multifunction device - Scanner setup

[Guest]

I have a network between 2 pc's and 1 laptop all running XP Home. I have
attached a Multifunction centre to 1 PC which I have been able to link my
laptop into for printing, however i am unable to access the scanning function
from my laptop. How do I set this up so as to enable full use of the mfc
through all computers on the network.

 

[David H. Lipman]

From: "aldogl" <[email protected]>

| I have a network between 2 pc's and 1 laptop all running XP Home. I have
| attached a Multifunction centre to 1 PC which I have been able to link my
| laptop into for printing, however i am unable to access the scanning function
| from my laptop. How do I set this up so as to enable full use of the mfc
| through all computers on the network.
| --
| arr66

Forget about the idea.

I have played with a Xerox 432 and HP devices with HP JetDirect print servers.

DEven with those that are capable of network capable scanners it is more than difficult and
problematic. There is no TWAIN capabilities and the solutions suck.

The fact that this multifunction device is physically connected to the PC pretty much
negates network scanning.

It may help if you specifically state the manufacturer and model of the multifuction device.

 

[Lanwench [MVP - Exchange]]

In

I have a network between 2 pc's and 1 laptop all running XP Home. I
have attached a Multifunction centre to 1 PC which I have been able
to link my laptop into for printing, however i am unable to access
the scanning function from my laptop. How do I set this up so as to
enable full use of the mfc through all computers on the network.

Not sure if this will work for you, but you might see
http://www.remote-scan.com/