Network and Internet Connectiviy

G

Guest

I have a vista comp connected to a home router which several other computers
are connected to and function fine. My comp, however, is continuously going
between 3 states of connectivity. Sometimes it will be connected to the
internet, sometimes it will be connected to the network but not have internet
connection, and sometimes it won't be able to see the network at all saying
the problem is that there is no network cable plugged in. It most likely
isn't the wiring, because I can connect another computer with the same cables
and its connection will be fine. Most often the computer will be fully
connected to the internet for about 1 minute, then it looks like the computer
does not detect any connection to a network, but takes a second and connects
to the network and takes a few more seconds and connects to the internet. I
think the problem is most likely between the computer and network, opposed to
the computer and internet.
 
G

Guest

Also it is often less than a 10 seconds the computer is connected to the
internet. I've been having this problem for about 3 days. Before 3 days ago
the computer was at a different house connected to a different router and
could not connect to the internet at all, not sure if it could connect to the
network. About a month before that, the computer had been connecting to the
internet fine for months.
 
R

Robert L [MVP - Networking]

It could be the incompatible issue. This search result may help,

Vista compatible issuesSome switches or routers may not compatible with Vista – Solutions: upgrade the firmware, disable the IPv6, re-configure the speed, and setup TCP/IP ...
www.chicagotech.net/vista/vistacompatible.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
I have a vista comp connected to a home router which several other computers
are connected to and function fine. My comp, however, is continuously going
between 3 states of connectivity. Sometimes it will be connected to the
internet, sometimes it will be connected to the network but not have internet
connection, and sometimes it won't be able to see the network at all saying
the problem is that there is no network cable plugged in. It most likely
isn't the wiring, because I can connect another computer with the same cables
and its connection will be fine. Most often the computer will be fully
connected to the internet for about 1 minute, then it looks like the computer
does not detect any connection to a network, but takes a second and connects
to the network and takes a few more seconds and connects to the internet. I
think the problem is most likely between the computer and network, opposed to
the computer and internet.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top