Vista ultimate and XP internet sharing?

  • Thread starter Thread starter Erik
  • Start date Start date
E

Erik

Hi

I've got Vista ultimate installed on one computer and XP SP2 on the other.
They're connect via cross-over cable with the Vista comp also connected to
the internet.
They can "see" each other but register each other as "unidentified network".
They've both got the same workgroup and correct ethernet drivers installed.
I've enabled internet connection sharing on the Vista comp but the XP keeps
getting "limited or no connection". I've gone through network setup wizard
many times and no change has occurred.

What is stopping XP from using the Vista's internet connection?

So far I've tried changing all of the following:
Changing workgroup names
Setting between private and public networks on Vista
Gone through countless "diagnose and repairs" and network wizards

Thanks
Erik
 
You may need to re-configure the NIC. This post may help,

Solved: Limited connectivity with ...A135-S4427 Satellite notebook that was just released with Vista Home Premium, ... Troubleshooting limited or no connectivity "This connection has limited or ...
http://www.chicagotech.net/netforums/viewtopic.php?t=246


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
Hi

I've got Vista ultimate installed on one computer and XP SP2 on the other.
They're connect via cross-over cable with the Vista comp also connected to
the internet.
They can "see" each other but register each other as "unidentified network".
They've both got the same workgroup and correct ethernet drivers installed.
I've enabled internet connection sharing on the Vista comp but the XP keeps
getting "limited or no connection". I've gone through network setup wizard
many times and no change has occurred.

What is stopping XP from using the Vista's internet connection?

So far I've tried changing all of the following:
Changing workgroup names
Setting between private and public networks on Vista
Gone through countless "diagnose and repairs" and network wizards

Thanks
Erik
 
Back
Top