MS Virtual CD-ROM Control Panel 2.0.1.1 (XP Only)

[Gordon Darling]

MS Virtual CD-ROM Control Panel 2.0.1.1 (XP Only)

http://www.langa.com/newsletters/2003/2003-11-13.htm#2

"The following tool for Windows XP allows image files to be mounted
virtually as CD-ROM devices."

URL:http://download.microsoft.com/downl...d58df02efa2/winxpvirtualcdcontrolpanel_21.exe

59KB

" Readme for Virtual CD-ROM Control Panel v2.0.1.1

THIS TOOL IS UNSUPPORT BY MICROSOFT PRODUCT SUPPORT SERVICES

System Requirements
===================
- Windows XP Home or Windows XP Professional

Installation instructions
=========================
1. Copy VCdRom.sys to your %systemroot%\system32\drivers folder. 2.
Execute VCdControlTool.exe
3. Click "Driver control"
4. If the "Install Driver" button is available, click it. Navigate to
the %systemroot%\system32\drivers folder, select VCdRom.sys, and click
Open.
5. Click "Start"
6. Click OK
7. Click "Add Drive" to add a drive to the drive list. Ensure that the
drive added is not a local drive. If it is, continue to click "Add
Drive" until an unused drive letter is available. 8. Select an unused
drive letter from the drive list and click "Mount".
9. Navigate to the image file, select it, and click "OK". UNC naming
conventions should not be used, however mapped network drives should be
OK.

You may now use the drive letter as if it were a local CD-ROM device.
When you are finished you may unmount, stop, and remove the driver from
memory using the driver control."

Regards
Gordon