G
Guest
this is an update of 11th
im on xp pro sp2, and have been using msn messenger.
i have a mic on my headset and one on my cam but i cant get sound from
either which makes me think im doing something wrong.
i dont have a sound card but its built into my mobo (dfi inf ultra) i have
two jacks at the front (pink and green, which my headphone is attached to)
and four jacs at the back, which my two small speakers are attached to
the sound comes out of my speakers and headphone speakers no problem.
ive been through sounds and audio devices numerous times, everything is
turned to high.
in the audio tab in sound recording i have two option
s, nvidia nforce audio
and cam, ive tried both to no avail,
under voice+ audio tab they are both set as nvidia nforce audio
under master volume everything is high, mic boost is ticked, but tone
controls are greyed out, dont know if that is significant or not
nothing is muted
device manager doesnt show any problems
the nforce control panel has mic turned up full, mic boost ticked, under
input i have chosen microphone and its turned to full under the main tab
i have tried using the sound recorder but that doesnt work either
under device manager, sound,video and game controllers i have (in order)
audio codecs
legacy audio drivers
legacy video capture devices
logitech microphone (messenger)
media control devices
nvidia nforce audio codec interface
nvidia nforce mcp audio processing unit dolby digital
standard game port
video codecs
should i have ac97?
i also tried the setup on messenger and its the same, headphones are fine,
nothing from mic
******UPDATE******
i downloaded the most uptodate 4.62a audio drivers from nvidia and now my
cam mic works, but my headphone one still wont. today i purchase a mic from
pc world and that wont work either, so i dont think its the headphones, also
i have a place in the front and back of the tower for the mic and neither
work, so its not a port fault, any ideas?
thanks in advance for any help
sensible replys please, not lessons in english grammar!
im on xp pro sp2, and have been using msn messenger.
i have a mic on my headset and one on my cam but i cant get sound from
either which makes me think im doing something wrong.
i dont have a sound card but its built into my mobo (dfi inf ultra) i have
two jacks at the front (pink and green, which my headphone is attached to)
and four jacs at the back, which my two small speakers are attached to
the sound comes out of my speakers and headphone speakers no problem.
ive been through sounds and audio devices numerous times, everything is
turned to high.
in the audio tab in sound recording i have two option
s, nvidia nforce audio
and cam, ive tried both to no avail,
under voice+ audio tab they are both set as nvidia nforce audio
under master volume everything is high, mic boost is ticked, but tone
controls are greyed out, dont know if that is significant or not
nothing is muted
device manager doesnt show any problems
the nforce control panel has mic turned up full, mic boost ticked, under
input i have chosen microphone and its turned to full under the main tab
i have tried using the sound recorder but that doesnt work either
under device manager, sound,video and game controllers i have (in order)
audio codecs
legacy audio drivers
legacy video capture devices
logitech microphone (messenger)
media control devices
nvidia nforce audio codec interface
nvidia nforce mcp audio processing unit dolby digital
standard game port
video codecs
should i have ac97?
i also tried the setup on messenger and its the same, headphones are fine,
nothing from mic
******UPDATE******
i downloaded the most uptodate 4.62a audio drivers from nvidia and now my
cam mic works, but my headphone one still wont. today i purchase a mic from
pc world and that wont work either, so i dont think its the headphones, also
i have a place in the front and back of the tower for the mic and neither
work, so its not a port fault, any ideas?
thanks in advance for any help
sensible replys please, not lessons in english grammar!