Media Center does not recognize tuner

[Guest]

I have a Plextor ConvertX PX-TV402U Connected to a Dell Dimension 9200.
This tuner is listed as working properly in Device Manager, and it works
fine with Sage TV or Intervideo Home Theater, but Vista Home Premium Media
Center does not detect it and reports I have no tuner.

Is this a known problem and is there a fix.

 

[Synapse Syndrome]

I have a Plextor ConvertX PX-TV402U Connected to a Dell Dimension 9200.
This tuner is listed as working properly in Device Manager, and it works
fine with Sage TV or Intervideo Home Theater, but Vista Home Premium Media
Center does not detect it and reports I have no tuner.

Is this a known problem and is there a fix.

That looks like a nice bit of hardware, but it has no BDA drivers for it to
work with Media Centre. Look on the right, under the links:

http://www.plextor.com/ENGLISH/products/TV402U.htm

"Note: ConvertX products are not compatible with Windows Media Center
Edition or Windows Vista OS"

ss.

 

[Synapse Syndrome]

Don't feel bad. My Terratec Cinergy HT PCI is supposed to be 100% Media
Center compatible, but Media Center can't find it with both hands, BDA
driver 'n all.

*vista ultimate 64-bit : c2 q6700 : ga-p35-dq6 : 4gb ram : 8800gtx : 2tb
hdd : 720w psu : 2x eizo cg241w*

That might be because there are no 64-bit BDA drivers for it?

ss.

 

[Synapse Syndrome]

*vista ultimate 64-bit : c2 q6700 : ga-p35-dq6 : 4gb ram : 8800gtx : 2tb
hdd : 720w psu : 2x eizo cg241w*

Oh by the way, with a powerful system like that, I bet you wished you waited
for the X38 chipset, which has just come out. I won't be replacing my 975X
based system for another couple of years though.

ss.

 

[Synapse Syndrome]

No, I studied up on the X38 before deciding because I could have gotten
the GA-X38-DQ6. According to a number of test reports I read, the
difference in performance is tiny. My next move will be to DDR3.

Hmmn, I thought you might know about hardware..

ss.

 

[Guest]

Hi,

I'm using the same TV-Tuner Card (Cinergy HT PCI on Vista 64Bit) and my
problem is that the VistaMediaCenter only is searching for DVB-T Channels,
not for analog... I have no idea where to config MC for this, any ideas?

Thx,
SAT

 

[Dominic Payer]

If the card does not have hardware mpeg2 encoding Windows Media Center will
not work for analog channels.