Mapped drives disconnect after inactivity

  • Thread starter Nathan B. Clark
  • Start date
N

Nathan B. Clark

I have three Windows XP workstations (SP1 & all updates
installed) connected to a Windows NT 4.0 SP6a Domain
Server via TCP/IP (NetBIOS enabled). The three XP boxes
each have 4 mapped drives to the server. Upon initial
login, everything works great, but if a user doesn't use
the mapped drives for a short period of time (say 10 or 15
minutes) and then tries to access one of them, the
following error occurs:

"An error occurred while reconnecting M: to \\SERVER\ADOBE

Microsoft Windows Network:
The local device name is already in use.

The connection has not been restored."


If I then try to access the server via My Network Places
the following error appears:

"\\SERVER is not accessible. You might not have
permission to use this network resource. Contact the
administrator of this server to find out if you have
access permissions.

Insufficient system resources exist to complete the
requested service."


I can access other workstations just fine, but nothing on
the server. I also have Windows 98 workstations connected
to the same server and they behave normally. If I either
reboot the workstation or simply log off and then log back
on, the mapped drives reconnect and I can access them
again without issue.

I've searched the Knowledge Base and have adjusted the
Autodisconnect setting, turned off the Web Client Service,
turned off all power management, changed network cards,
and run through a slew of other troubleshooting
techniques - all without avail.

Has anyone else out there experienced this issue? Any
other ideas?

Thanks for your help.
 
R

Ramesh \(XP Power User\)

1. Disable power management on the NIC card via device manager. If this is
enabled, Windows tends to disable the device after a certain period of
inactivity.

2. Prolong or disable the net idle disconnect using "net config" command
Type net config server to display the current configuration for the Server
service.

To disable idle disconnect, try this command:

"net config server /autodisconnect:-1"

For more parameters, visit:
http://www.cotse.com/Ntcommands/ntcmdsuntitled00000334.html

_______________________________________
Ramesh Srinivasan
MSWindows OS- Poweruser
eMail: (e-mail address removed)
Aim: SRamesh2k
INDIA



I have three Windows XP workstations (SP1 & all updates
installed) connected to a Windows NT 4.0 SP6a Domain
Server via TCP/IP (NetBIOS enabled). The three XP boxes
each have 4 mapped drives to the server. Upon initial
login, everything works great, but if a user doesn't use
the mapped drives for a short period of time (say 10 or 15
minutes) and then tries to access one of them, the
following error occurs:

"An error occurred while reconnecting M: to \\SERVER\ADOBE

Microsoft Windows Network:
The local device name is already in use.

The connection has not been restored."


If I then try to access the server via My Network Places
the following error appears:

"\\SERVER is not accessible. You might not have
permission to use this network resource. Contact the
administrator of this server to find out if you have
access permissions.

Insufficient system resources exist to complete the
requested service."


I can access other workstations just fine, but nothing on
the server. I also have Windows 98 workstations connected
to the same server and they behave normally. If I either
reboot the workstation or simply log off and then log back
on, the mapped drives reconnect and I can access them
again without issue.

I've searched the Knowledge Base and have adjusted the
Autodisconnect setting, turned off the Web Client Service,
turned off all power management, changed network cards,
and run through a slew of other troubleshooting
techniques - all without avail.

Has anyone else out there experienced this issue? Any
other ideas?

Thanks for your help.
 
N

Nathan B. Clark

Ramesh,

Thanks for your input, but I've already done both of those
things along with anything I could find referencing those
error messages in the Knowledgebase. Any other ideas?

Nathan
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads


Top